Order Products : sales@su-jiao.com
PureTherm® 3007C Medical
| Category: | Film, PVC , PVC Film |
| Manufacturer: | Tekni-Films, a div of Tekni-Plex |
| Trademark: | PureTherm® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ZLbEiq_PureTherm-3007C-Medical.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Specific Gravity | 1.33 | g/cm³ |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness 1 | 127 to 1020 | µm |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Cold Impact | Good | ||
| Heat Distortion | 75 | °C | ASTM D1637 |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Roll Width 2 | < 106.70 | cm | |
| Thermoforming Molding Temperature | 100 to 175 | °C |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength - MD (Yield) | 50.0 | MPa | ASTM D882 |
| Oxygen Transmission Rate (Wet) (23°C, 250 µm, 100% RH) | 15.5 | cm³/m²/24 hr | ASTM F1927 |
| Water Vapor Transmission 3 | 3.1 | g/m²/24 hr | ASTM E96 |
| Free Shrinkage | -4.0 to 4.0 | % | ASTM D2732 |
| Note Message | |
|---|---|
| 1 . | Thickness tolerance: ±10% |
| 2 . | Roll width tolerance: ±1.5 mm |
| 3 . | at 10 mil at 38°C, 90% RH |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POWERSIL® 310 | Wacker Chemie AG | Silicone | POWERSIL® |
| Royalene® 677 | Lion Copolymer, LLC | EPDM | Royalene® |
| ShinkoLite-P UT-300 | Mitsubishi Rayon America Inc. | Acrylic (PMMA) | ShinkoLite-P |
| GPPC ABS D-120 | GPPC Chemical Co., Ltd. | ABS | GPPC ABS |
| Elvacite® 2014 | Lucite International Inc. | Acrylic (PMMA) | Elvacite® |
