Order Products : sales@su-jiao.com
RELENE® M26500
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Reliance Industries Limited |
| Trademark: | RELENE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ZLU7gb_RELENE-M26500.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| M 26500 is a butene comonomer based Linear Low Density grade with narrow molecular weight distribution and optimum levels of antioxidants. It offers excellent processability and is mainly recommended for preparing masterbatch. This grade can also be used for producing injection moulded lids, containers, houseware & general purpose articles as it exhibits good flexibility, low warpage and good fluidity. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.926 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 50 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, Injection Molded) | 11.5 | MPa | ASTM D638 |
| Tensile Elongation (Break, Injection Molded) | 600 | % | ASTM D638 |
| Flexural Modulus (Injection Molded) | 250 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 97.0 | °C | ASTM D1525 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Resinoid 2017 | Resinoid Engineering Corporation | Phenolic | Resinoid |
| Shanghai Potomer SG6 | Shanghai Potomer International Trade Co., Ltd. | PVC, Unspecified | Shanghai Potomer |
| Hifax HSBM CB 1159 G | LyondellBasell Industries | PP Impact Copolymer | Hifax |
| PEEK-OPTIMA® Image Contrast (Low radiopacity) | Invibio Inc. | PEEK | PEEK-OPTIMA® |
| PENTAMID AB GV15 E H natur | PENTAC Polymer GmbH | Nylon 66/6 | PENTAMID AB |
