Order Products : sales@su-jiao.com
NYLOY® MG-4033N
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | Nytex Composites Co., Ltd. |
| Trademark: | NYLOY® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ZKOKKC_NYLOY-MG-4033N.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| NYLOY® MG-4033N is a Polyamide 66 (Nylon 66) material. It is available in Asia Pacific or North America. Primary attribute of NYLOY® MG-4033N: Wear Resistant. |
| General Information | |
|---|---|
| Features |
|
| Appearance |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.22 | g/cm³ | ASTM D792 |
| Molding Shrinkage | ASTM D955 | ||
| Flow | 0.43 | % | |
| Across Flow | 1.1 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 83 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 167 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 2.0 | % | ASTM D638 |
| Flexural Modulus | 8730 | MPa | ASTM D790 |
| Flexural Strength | 235 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.18 mm) | 150 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 243 | °C | ASTM D648 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Yanshan PE LD100-AC | SINOPEC Beijing Yanshan Petrochemical | LDPE | Yanshan PE |
| Crastin® FG6129 NC010 | DuPont Performance Polymers | PBT | Crastin® |
| HiFill® PA6/6 GF43 IM L | Techmer Engineered Solutions | Nylon 66 | HiFill® |
| LubriOne™ LB 6000-5006 NHFR NATURAL | PolyOne Corporation | Nylon 6 | LubriOne™ |
| Plenco 07500 (Compression) | Plastics Engineering Co. | Phenolic | Plenco |
