Order Products : sales@su-jiao.com
TYNEP® P5308
| Category: | PC+PBT , Polycarbonate + PBT |
| Manufacturer: | Tyne Plastics LLC. |
| Trademark: | TYNEP® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ZH4KaQ_TYNEP-P5308.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| TYNEP® P5308 is a Polycarbonate + PBT (PC+PBT) material filled with 30% glass fiber. It is available in North America. Primary attribute of TYNEP® P5308: Low Gloss. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.22 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 0.60 to 0.90 | % | ASTM D955 |
| Water Absorption (24 hr) | 0.16 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 103 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | 3.0 | % | ASTM D638 |
| Flexural Modulus | 6890 | MPa | ASTM D790 |
| Flexural Strength | 186 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.18 mm) | 96 | J/m | ASTM D256 |
| Unnotched Izod Impact (3.18 mm) | 690 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed | 171 | °C | |
| 1.8 MPa, Unannealed | 210 | °C |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+15 | ohms·cm | ASTM D257 |
| Dielectric Strength (1.57 mm, in Air) | 29 | kV/mm | ASTM D149 |
| Dielectric Constant (1 MHz) | 3.60 | ASTM D150 | |
| Dissipation Factor (1 MHz) | 0.020 | ASTM D150 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| VENYL UG301 - 8070 | AD majoris | Nylon 66 | VENYL |
| Niretan B C30 | Soredi S.p.a. | Nylon 6 | Niretan B |
| 3M™ Dyneon™ Fluoroplastic PFA 6503PAZ | 3M Advanced Materials Division | PFA | 3M™ Dyneon™ Fluoroplastic |
| Huafon HF-4075A | Huafon Group Co., Ltd. | TPU-Polyether | Huafon |
| Mafill® CR CT 5544 H | Ravago Group | PP Copolymer | Mafill® |
