Order Products : sales@su-jiao.com
KRATON® D1170 B
| Category: | SIS , Styrene Isoprene Styrene Block Copolymer |
| Manufacturer: | Kraton Polymers LLC |
| Trademark: | KRATON® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ZH2lO1_KRATON-D1170-B.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Kraton D1170 B is a clear, linear triblock copolymer based on styrene, butadiene and isoprene with a polystyrene content of 19%. It is supplied from South America as outlined in the physical form identified below.
Kraton D1170 B is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen and polymers. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.918 | g/cm³ | ISO 2781 |
| Apparent Density | 0.40 | g/cm³ | ASTM D1895B |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | 13 | g/10 min | ISO 1133 |
| Solution Viscosity 1 | 1100 | mPa·s | Internal Method |
| Bound Styrene | 17.0 to 21.0 | % | Internal Method |
| Antioxidant Additive 2 | 0.1 to 0.2 | wt% | Internal Method |
| Ash Content - BT 3 | 0.40 to 0.80 | % | ISO 247 |
| Total Extractables | < 1.0 | wt% | Internal Method |
| Volatile Matter | < 0.30 | wt% | Internal Method |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A, 10 sec) | 46 | ISO 868 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (300% Strain) | 1.40 | MPa | ISO 37 |
| Tensile Stress (Yield) | 11.0 | MPa | ISO 37 |
| Tensile Elongation (Break) | 1200 | % | ISO 37 |
| Note Message | |
|---|---|
| 1 . | 25%w toluene solution at 25°C |
| 2 . | Primary antioxidant is a non-staining, phenolic antioxidant. |
| 3 . | Talc |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Razalen® P311 | Razin™ Engineering Plastics | PP Impact Copolymer | Razalen® |
| QR Resin QR-1220LG(V) | QTR, Inc. | PC+ABS | QR Resin |
| TECHNYL® C 218L V30 BLACK Z/4 | Solvay Engineering Plastics | Nylon 6 | TECHNYL® C |
| NuSil CV2-1142 | NuSil Technology | Silicone | NuSil |
| Deprene 251-90 | Shanghai Lin Gen Rubber Materials Co., Ltd. | PP+EPDM | Deprene |
