Order Products : sales@su-jiao.com
Hostacom TKS716D
| Category: | TPO (POE) , Thermoplastic Polyolefin Elastomer |
| Manufacturer: | LyondellBasell Industries |
| Trademark: | Hostacom |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ZEIWOu_Hostacom-TKS716D.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This information has been secured during the course of product development. Both the product and its properties are subject to change before final commercialization. Hostacom TKS716D conventional melt flow, 800 MPa flexural modulus, UV-stabilized thermoplastic elastomeric olefin (TEO) resin has a good balance of properties and processability. It was designed for molded-in color applications that require good weatherability, and a reasonable impact/stiffness balance. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.910 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 6.0 | g/10 min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Modulus | 800 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact Strength (23°C) | 40 | kJ/m² | ISO 180 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| MAXAMID™ EPDM2066-BK09W Process | Pier One Polymers, Inc. | Nylon 66 | MAXAMID™ |
| 3M™ Dyneon™ Fluoroplastic THV 500GZ | 3M Advanced Materials Division | Fluorelastomer | 3M™ Dyneon™ Fluoroplastic |
| ADDINYL PMD 20164 | ADDIPLAST | Nylon 6 | ADDINYL |
| AKROMID® A3 GF 50 1 natural (1259) | AKRO-PLASTIC GmbH | Nylon 66 | AKROMID® |
| Anjacom® 55/80-GK10 | Almaak International GmbH | PC+ABS | Anjacom® |
