Order Products : sales@su-jiao.com
Marlex® HMN 6060
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Saudi Polymers Company |
| Trademark: | Marlex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ZDXXxW_Marlex-HMN-6060.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
This hexene copolymer is tailored for injection moulding applications that require:
Typical injection moulded applications for HMN 6060 include items such as:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.963 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 6.0 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (100% Igepal, Compression Molded, F50) | < 20.0 | hr | ASTM D1693B |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, Compression Molded) | 66 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield, Compression Molded) | 33.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Break, Compression Molded) | 990 | % | ASTM D638 |
| Flexural Modulus | ASTM D790 | ||
| 1% secant : Molding | 1670 | MPa | ASTM D790 |
| Tangent : Molding | 2500 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, Compression Molded) | 38 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648A | ||
| 0.45 MPa, unannealed, molded | 87.0 | °C | ASTM D648A |
| 1.8 MPa, unannealed, molded | 52.0 | °C | ASTM D648A |
| Brittleness Temperature 3 | < -75.0 | °C | ASTM D746A |
| Vicat Softening Temperature | 127 | °C | ASTM D1525 4 |
| Additional Information |
|---|
| The physical properties were determined on compression moulded specimens that were prepared in accordance with Procedure C of ASTM D4703, Annex A1. |
| Note Message | |
|---|---|
| 1 . | Type 4, 51mm/min |
| 2 . | Type 4, 51mm/min |
| 3 . | Type I specimen |
| 4 . | 速率 A (50°C/h), 压 力1 (10N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Ultramid® A3ZG3 HP BK20465 | BASF Corporation | Nylon 66 | Ultramid® |
| NILAMID® B3 W J20 | Nilit Plastics | Nylon 6 | NILAMID® |
| BESTPOLUX PCAHC/02 | Triesa Plastics | PC+ABS | BESTPOLUX |
| Dryflex® A2 602450 | ELASTO | SEBS | Dryflex® |
| Kuraray K-Polymer KL-118 | Kuraray Co., Ltd. | PVOH | Kuraray K-Polymer |
