Order Products : sales@su-jiao.com
SUSTATRON PPS MOD
| Category: | PPS , Polyphenylene Sulfide |
| Manufacturer: | Röchling Sustaplast SE & Co. KG |
| Trademark: | SUSTATRON |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ZBRUmU_SUSTATRON-PPS-MOD.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Product characteristics
Typical fields of applcation
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.38 | g/cm³ | ISO 1183 |
| Water Absorption (Equilibrium, 23°C, 50% RH) | 0.030 | % | ISO 62 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D) | 77 | ISO 868 | |
| Ball Indentation Hardness | 130 | MPa | ISO 2039-1 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 3000 | MPa | ISO 527-2 |
| Tensile Stress (Yield) | 50.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 4.0 | % | ISO 527-2 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | 5.0 | kJ/m² | ISO 179 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Continuous Use Temperature | |||
| -- 1 | -20.0 to 220 | °C | |
| -- 2 | < 260 | °C | |
| Melting Temperature | 285 | °C | ISO 11357-3 |
| CLTE - Flow | 5.0E-5 | cm/cm/°C | DIN 53752 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 3.00 mm | V-0 | ||
| 6.00 mm | V-0 |
| Note Message | |
|---|---|
| 1 . | Long Term |
| 2 . | Short Term |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| HIVOREX 7000F | Lotte Chemical Corporation | HDPE | HIVOREX |
| ICORENE® N6501 | ICO Polymers EMEA, A Division of A. Schulman | PS (HIPS) | ICORENE® |
| Pearlthane® 11T85E | Lubrizol Advanced Materials, Inc. | TPU-Capro | Pearlthane® |
| LUVOCOM® 1-9065/BL/L | LEHVOSS Group | Nylon 66 | LUVOCOM® |
| ALCOM® PC 740/4 UV WT1296-07LD | ALBIS PLASTIC GmbH | PC | ALCOM® PC |
