Order Products : sales@su-jiao.com

Mold Max® 30

Category:	Silicone , Silicone
Manufacturer:	Smooth-On, Inc
Trademark:	Mold Max®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	ZAAzRF_Mold-Max-30.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Mold Max® Silicones are tin-cured silicone rubber compounds that have exceptional working properties and library life. Mold Max® Silicones feature Smooth-On's exclusive "Libra®" catalyst for long library life. Mold Max® silcones can be pigmented with Silc Pig® silicone colorants. Pot life for the pourable silicones is 45 minutes and they cure overnight at room temperature. Mold Max® Silicones will reproduce the finest detail and are suitable for a variety of industrial and art related applications including making molds for reproducing prototypes, furniture, sculpture and architectural elements. Mold Max® 10, 20, 25 and 30 silicones can be thickened with THI-VEX® additive for brush-on applications. (Note: THI-VEX® is NOT compatible with Mold Max® 40 or 60). Mold Max® 60 offers highest heat resistance for casting metal (see separate technical bulletin). Mold Max® Silicones can be used to cast a variety of materials including wax, gypsum, low melt alloys/metals and urethane, epoxy or polyester resins (without using a release agent).

Message

Mold Max® Silicones are tin-cured silicone rubber compounds that have exceptional working properties and library life. Mold Max® Silicones feature Smooth-On's exclusive "Libra®" catalyst for long library life. Mold Max® silcones can be pigmented with Silc Pig® silicone colorants. Pot life for the pourable silicones is 45 minutes and they cure overnight at room temperature.

Mold Max® Silicones will reproduce the finest detail and are suitable for a variety of industrial and art related applications including making molds for reproducing prototypes, furniture, sculpture and architectural elements. Mold Max® 10, 20, 25 and 30 silicones can be thickened with THI-VEX® additive for brush-on applications. (Note: THI-VEX® is NOT compatible with Mold Max® 40 or 60). Mold Max® 60 offers highest heat resistance for casting metal (see separate technical bulletin).

Mold Max® Silicones can be used to cast a variety of materials including wax, gypsum, low melt alloys/metals and urethane, epoxy or polyester resins (without using a release agent).

General Information
Uses	Modeling Material Prototyping
Appearance	Pink
Processing Method	Casting

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.18	g/cm³	ASTM D1475
Specific Volume	0.849	cm³/g	ASTM D1475

Additional Information	Nominal Value	Unit	Test Method
Mixing Ratio	100A:10B by weight
Operating Temperature	-54 to 204	°C

Physical	Nominal Value	Unit	Test Method
Molding Shrinkage - Flow	0.20	%	ASTM D2566

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A)	30		ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress (100% Strain)	0.758	MPa	ASTM D412
Tensile Strength (Break)	3.98	MPa	ASTM D412
Tensile Elongation (Break)	300	%	ASTM D412
Tear Strength ¹	21.9	kN/m	ASTM D624

Thermoset	Nominal Value	Unit	Test Method
Pot Life	45	min
Thermoset Mix Viscosity	25000	cP	ASTM D2393
Demold Time	1400	min

Note Message
1 .	Die B

Resin Grade	Manufacturer	Category	Trademark
Prime Tuff-X ST	Primex Plastics Corporation	Unspecified	Prime Tuff-X
TAIRIPRO K3004	Formosa Plastics Corporation	PP Impact Copolymer	TAIRIPRO
APEX® 3202-70NT	Teknor Apex Company	PVC, Flexible	APEX®
Daelim Po1y® PA-164V	DAELIM INDUSTRIAL CO., LTD.	PP Homopolymer	Daelim Po1y®
HiFill® HDPE TM5	Techmer Engineered Solutions	HDPE	HiFill®