Order Products : sales@su-jiao.com
Andur 8 APFLM/Curene® 442
| Category: | PUR-Ester/TDI , Polyurethane (Polyester, TDI) |
| Manufacturer: | Anderson Development Company |
| Trademark: | Andur |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Z6ShtZ_Andur-8-APFLM-Curene-442.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Andur 8-APF-LM is a polyester based liquid, toluene diisocyanate terminated prepolymer. An elastomer with a hardness of 80 Shore A is obtained when this prepolymer is cured with Curene 442 [4,4'-methylene-bis (orthochloroaniline)]. Elastomers of lower hardness can be obtained by curing Andur 8-APF-LM with polyols and their combination with Curene 442 and other diamines or by the use of plasticizers. The short pot life of Andur 8-APF-LM makes it ideal for machine casting. |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.21 | g/cm³ | ASTM D1505 |
| Molding Shrinkage - Flow | 1.6 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 80 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% strain | 4.62 | MPa | ASTM D412 |
| 300% strain | 7.03 | MPa | ASTM D412 |
| Tensile Strength (Yield) | 47.6 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 630 | % | ASTM D412 |
| Compression Set | 26 | % | ASTM D395B |
| Bayshore Resilience | 39 | % | ASTM D2632 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Pot Life | 5.0 - 6.0 | min | |
| Demold Time | 30 | min | |
| Post Cure Time (96°C) | 16 | hr |
| Additional Information |
|---|
| Durometer Hardness, ASTM D2240, Shore D: 78 to 82Die C Tear, ASTM D1004: 395 pliAverage Split Tear, ASTM D1938: 235 pliMix Temperature: Andur 8 APLFM: 195-212°F Curene 442: 235-250°F |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Mold Temperature | 104 - 113 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 132 Z | RTP Company | PP, Unspecified | RTP |
| REPOL® C080MA | Reliance Industries Limited | PP Impact Copolymer | REPOL® |
| Diakon® CLH374 | Lucite International Inc. | Acrylic (PMMA) | Diakon® |
| Ecollent™ PC/ABS-406E | Lucent Polymers, Inc. | PC+ABS | Ecollent™ |
| Lumiplas庐 LD590T | LG Chem Ltd. | MABS | Lumiplas® |
