Order Products : sales@su-jiao.com

ULTEM™ 2100 resin

Category:	PEI , Polyether Imide
Manufacturer:	SABIC Innovative Plastics
Trademark:	ULTEM™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	Z5TALZ_ULTEM-2100-resin.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message
10% Glass fiber filled, standard flow Polyetherimide (Tg 217C). ECO Conforming, UL94 V0 and 5VA listing. NSF 51 listing, WRAS certification in recognized colors.

General Information
Filler / Reinforcement	Glass Fiber, 10% Filler by Weight
Features	ECO Compliant
Agency Ratings	EU Eco NSF 51 WRAS Unspecified Rating
Processing Method	Injection Molding
Multi-Point Data	Coefficient of Thermal Expansion vs. Temperature (ASTM E831) Elastic Modulus vs Temperature (ASTM D4065) Flexural DMA (ASTM D4065) Shear DMA (ASTM D4065) Specific Heat vs. Temperature (ASTM D3417) Tensile Fatigue Tensile Stress vs. Strain (ASTM D638) Thermal Conductivity vs. Temperature (ASTM E1530) Viscosity vs. Shear Rate (ASTM D3835)

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.34	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (337°C/6.6 kg)	7.0	g/10 min	ASTM D1238
Molding Shrinkage - Flow (3.20 mm)	0.50 to 0.60	%	Internal Method
Water Absorption			ASTM D570
24 hr	0.21	%
Equilibrium, 23°C	1.2	%

Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (M-Scale)	114		ASTM D785

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus ¹	4690	MPa	ASTM D638
Tensile Strength ²			ASTM D638
Yield	114	MPa
Break	116	MPa
Tensile Elongation ³(Break)	6.0	%	ASTM D638
Flexural Modulus ⁴(100 mm Span)	5170	MPa	ASTM D790
Flexural Strength ⁵(Break, 100 mm Span)	200	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (23°C)	53	J/m	ASTM D256
Unnotched Izod Impact (23°C)	480	J/m	ASTM D4812
Reverse Notch Izod Impact (3.20 mm)	460	J/m	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load			ASTM D648
0.45 MPa, Unannealed, 6.40 mm	210	°C
1.8 MPa, Unannealed, 6.40 mm	209	°C
Vicat Softening Temperature	223	°C	ASTM D1525 ⁶
CLTE - Flow (-20 to 150°C)	3.2E-5	cm/cm/°C	ASTM E831
RTI Elec	170	°C	UL 746
RTI Imp	170	°C	UL 746
RTI Str	170	°C	UL 746

Electrical	Nominal Value	Unit	Test Method
Volume Resistivity	1.0E+17	ohms·cm	ASTM D257
Dielectric Strength (1.60 mm, in Oil)	28	kV/mm	ASTM D149
Dielectric Constant (1 kHz)	3.50		ASTM D150
Dissipation Factor			ASTM D150
1 kHz	1.4E-3
2.45 GHz	4.6E-3
Arc Resistance ⁷	PLC 6		ASTM D495
Comparative Tracking Index (CTI)	PLC 4		UL 746
High Amp Arc Ignition (HAI)	PLC 4		UL 746
High Voltage Arc Tracking Rate (HVTR)	PLC 2		UL 746
Hot-wire Ignition (HWI)	PLC 1		UL 746

Flammability	Nominal Value	Unit	Test Method
Flame Rating			UL 94
0.406 mm	V-0
1.91 mm	5VA
Oxygen Index	47	%	ASTM D2863
NBS Smoke Density - Flaming, Ds, 4 min	1.80		ASTM E662

Injection	Nominal Value	Unit
Drying Temperature	149	°C
Drying Time	4.0 to 6.0	hr
Drying Time, Maximum	24	hr
Suggested Max Moisture	0.020	%
Suggested Shot Size	40 to 60	%
Rear Temperature	332 to 399	°C
Middle Temperature	338 to 399	°C
Front Temperature	343 to 399	°C
Nozzle Temperature	343 to 399	°C
Processing (Melt) Temp	349 to 399	°C
Mold Temperature	135 to 163	°C
Back Pressure	0.345 to 0.689	MPa
Screw Speed	40 to 70	rpm
Vent Depth	0.025 to 0.076	mm

Note Message
1 .	5.0 mm/min
2 .	Type I, 5.0 mm/min
3 .	Type I, 5.0 mm/min
4 .	2.6 mm/min
5 .	2.6 mm/min
6 .	Rate B (120°C/h), Loading 2 (50 N)
7 .	Tungsten Electrode

Resin Grade	Manufacturer	Category	Trademark
Moplen EP310R	PolyMirae	PP Copolymer	Moplen
TEREZ PA 6.6 7600 FL HF	TER HELL PLASTIC GMBH	Nylon 66	TEREZ PA 6.6
LNP™ STAT-KON™ UEF26AS compound	SABIC Innovative Plastics Europe	PPA	LNP™ STAT-KON™
MAJORIS DT360 - 8229	AD majoris	PP, Unspecified	MAJORIS
Plasmer 1380N/1002	HYUNDAI EP Co., Ltd.	TPE	Plasmer