Order Products : sales@su-jiao.com
Generic Phenolic - Flock
| Category: | Phenolic , Phenolic |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Z546Mc_Generic-Phenolic---Flock.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic Phenolic - Flock This information is provided for comparative purposes only. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.53 to 1.60 | g/cm³ | ASTM D792 |
| Apparent Density | 0.61 to 0.63 | g/cm³ | ASTM D1895 |
| Molding Shrinkage - Flow (23°C) | 0.29 to 0.30 | % | ASTM D955 |
| Water Absorption (23°C, 24 hr) | 0.13 to 0.18 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (23°C) | 79 to 84 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (23°C) | 9990 to 10500 | MPa | ASTM D638 |
| Tensile Strength (23°C) | 51.4 to 56.2 | MPa | ASTM D638 |
| Tensile Elongation (Break, 23°C) | 0.60 to 1.0 | % | ASTM D638 |
| Flexural Modulus (23°C) | 6780 to 9840 | MPa | ASTM D790 |
| Flexural Strength (23°C) | 80.4 to 94.1 | MPa | ASTM D790 |
| Compressive Strength (23°C) | 140 to 201 | MPa | ASTM D695 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 18.0 to 22.1 | J/m | ASTM D256 |
| Notched Izod Impact (23°C) | 17 to 24 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 158 to 236 | °C | ASTM D648 |
| Continuous Use Temperature | 197 to 204 | °C | ASTM D794 |
| CLTE - Flow | 3.4E-5 to 6.0E-5 | cm/cm/°C | ASTM E831 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity (23°C) | 1.3E+11 to 3.9E+11 | ohms·cm | ASTM D257 |
| Dielectric Strength (23°C) | 6.0 to 17 | kV/mm | ASTM D149 |
| Dielectric Constant (23°C) | 5.29 to 5.36 | ASTM D150 | |
| Dissipation Factor (23°C) | 0.047 to 0.073 | ASTM D150 | |
| Arc Resistance | 133 to 185 | sec | ASTM D495 |
| Comparative Tracking Index (CTI) | 174 to 175 | V | UL 746 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index | 27 to 42 | % | ASTM D2863 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Andur 700-APX/Curene® 442 | Anderson Development Company | PUR-Est/eth,TDI | Andur |
| Artenius AQUA | Artenius | PET | Artenius |
| Hanwha Total PP BJ732 | HANWHA TOTAL PETROCHEMICALS Co., Ltd. | PP Impact Copolymer | Hanwha Total PP |
| ESPREE™ ABS7017 | SABIC Innovative Plastics | ABS | ESPREE™ |
| Hylex® P1317 L1 HB | Entec Polymers | PC | Hylex® |
