Order Products : sales@su-jiao.com
Dryflex® SE 70A301
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | ELASTO |
| Trademark: | Dryflex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Z44tsO_DryflexSE70A301.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Dryflex SE is our standard TPE range. It is extremely adaptable and can be used advantageously in many applications. The compounds are easy to process and are optimised for injection moulding. We have developed endless formulations to fulfil different properties and application requirements to optimise the finished component. Grades with improved compression set properties, high temperature resistance or more cost efficient values are an essential part of today's wide product spectrum. The most significant features of the Dryflex SE filled series are an improved heat stability. A filled material reduces the stickiness and sink marks on thick details but has limited scratch resistance. The filled grades generally allow for fast demoulding and shorter cycle times. Compounds in the Dryflex SE filled series are available in hardness from 30 to 90 Shore A in natural and black colours but they can easily be coloured. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.18 | g/cm³ | ISO 2781 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 15 sec) | 70 | ISO 868 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress - Across Flow | ISO 37 | ||
| 100% strain | 2.00 | MPa | ISO 37 |
| 300% strain | 2.80 | MPa | ISO 37 |
| Tensile Stress - Across Flow (Break) | 8.00 | MPa | ISO 37 |
| Tensile Elongation - Across Flow (Break) | 800 | % | ISO 37 |
| Tear Strength 1 | 23 | kN/m | ISO 34-1 |
| Compression Set 2 | ISO 815 | ||
| 23°C, 72 hr | 29 | % | ISO 815 |
| 70°C, 22 hr | 47 | % | ISO 815 |
| 100°C, 22 hr | 70 | % | ISO 815 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80 | °C | |
| Drying Time | 2.0 - 3.0 | hr | |
| Rear Temperature | 170 - 190 | °C | |
| Middle Temperature | 180 - 200 | °C | |
| Front Temperature | 190 - 210 | °C | |
| Nozzle Temperature | 200 - 220 | °C | |
| Mold Temperature | 15 - 50 | °C | |
| Injection Rate | Moderate-Fast |
| Note Message | |
|---|---|
| 1 . | C method: crescent sample |
| 2 . | Type B |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Scolefin 52 T 10-91 | Ravago Group | PP Homopolymer | Scolefin |
| Synthos PS GP 585C | Synthos S.A. | PS (GPPS) | Synthos PS |
| VITAMIDE® BT11BK6559 | Jackdaw Polymers | Nylon 6 | VITAMIDE® |
| BMC 6605A | Bulk Molding Compounds, Inc. | Polyester, TS | BMC |
| Geon™ Vinyl Flexible B5D01 | PolyOne Corporation | PVC, Flexible | Geon™ Vinyl Flexible |
