Order Products : sales@su-jiao.com

NuSil R1-3930-11

Category:	Silicone , Silicone
Manufacturer:	NuSil Technology
Trademark:	NuSil
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	YyiROL_NuSil-R1-3930-11.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
The Aircraft Industry has used silicone adhesives and coatings for over five decades. Silicone's ability to maintain its elasticity and low modulus over a broad temperature range provides excellent utility in extreme environments. Recent advances in material technology provide more opportunities for the Aircraft engineer in choosing the best material for an intended application. Examples of NuSil's capabilities in custom silicones for Aircraft are demonstrated in the following sections. Fuel Resistance Static Dissipation and Electrically Conductive Silicones Ice-Phobic Coatings General Purpose: Coatings Comment: 240 psi (1.7Mpa) Lap Shear at 7 D @ R.T., H/Fed. Color Standard 36118

Message

The Aircraft Industry has used silicone adhesives and coatings for over five decades. Silicone's ability to maintain its elasticity and low modulus over a broad temperature range provides excellent utility in extreme environments. Recent advances in material technology provide more opportunities for the Aircraft engineer in choosing the best material for an intended application. Examples of NuSil's capabilities in custom silicones for Aircraft are demonstrated in the following sections.

Fuel Resistance

Static Dissipation and Electrically Conductive Silicones

Ice-Phobic Coatings

General Purpose: Coatings

Comment: 240 psi (1.7Mpa) Lap Shear at 7 D @ R.T., H/Fed. Color Standard 36118

General Information
Features	Electrically Conductive Fuel Resistant
Uses	Aircraft Applications Coating Applications

Thermoset	Nominal Value	Unit
Tack Free Time	20.0	min

Additional Information	Nominal Value	Unit
Cure System	Acetoxy
Operating Temperature	-50 to 200	°C

Uncured Properties	Nominal Value	Unit
Color	Grey
Density	1.48	g/cm³
Curing Time (23°C)	72	hr

Cured Properties	Nominal Value	Unit
Shore Hardness (Shore A)	40
Lap Shear Strength ¹	1.65	MPa
Tensile Strength	5.00	MPa
Tensile Elongation at Break	250	%
Tear Strength	7.01	kN/m

Note Message
1 .	Primed with SP-130

Resin Grade	Manufacturer	Category	Trademark
RTP 200.5	RTP Company	Nylon 66	RTP
Daelim Po1y庐 LD-08	DAELIM INDUSTRIAL CO., LTD.	LDPE	Daelim Po1y®
Hostacom HKC 465T	LyondellBasell Industries	PP Homopolymer	Hostacom
Lupoy® 1600-03	LG Chem Ltd.	PC	Lupoy®
PLUSTEK RA845	Polyram Ram-On Industries	Nylon 66	PLUSTEK