Order Products : sales@su-jiao.com
RTP 1200 S-65D
| Category: | TPU-Polyester , Thermoplastic Polyurethane Elastomer (Polyester) |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | YyCfnA_RTP-1200-S-65D.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| RTP 1200 S-65D is a thermoplastic polyurethane elastomer (polyester)(TPU-polyester) material,. This product is available in North America, Africa and the Middle East, Latin America, Europe or Asia Pacific. The processing method is injection molding. |
| General Information | |
|---|---|
| RoHS Compliance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.22 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.20 mm) | 1.1 | % | ASTM D955 |
| Moisture Content | 0.020 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 65 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Modulus | 255 | MPa | ASTM D790 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 50% strain, 3.18mm 1 | 16.5 | MPa | ASTM D412 |
| 100% strain, 3.18mm 2 | 20.0 | MPa | ASTM D412 |
| 300% strain, 3.18mm 3 | 31.0 | MPa | ASTM D412 |
| Tensile Strength (Yield) | 44.1 | MPa | ASTM D412 |
| Tensile Elongation (Yield) | 390 | % | ASTM D412 |
| Tear Strength 4 | 263 | kN/m | ASTM D624 |
| Compression Set 5(23°C, 22 hr) | 30 | % | ASTM D395B |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 107 | °C | |
| Drying Time | 6.0 | hr | |
| Dew Point | -28.9 | °C | |
| Processing (Melt) Temp | 210 - 221 | °C | |
| Mold Temperature | 26.7 - 60.0 | °C | |
| Injection Pressure | 41.4 - 103 | MPa |
| Injection instructions |
|---|
| Desiccant Type Dryer Required. |
| Note Message | |
|---|---|
| 1 . | C mould |
| 2 . | Mouth die c |
| 3 . | C mould |
| 4 . | C mould |
| 5 . | Type 2 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Anjacom® 150-GF50 | Almaak International GmbH | PC | Anjacom® |
| Chemlon® MDF35 | Teknor Apex Company (Chem Polymer) | Nylon 6 | Chemlon® |
| KOPLA PA66 KDP1200 | KOPLA Co., Ltd. | Nylon 66 | KOPLA PA66 |
| Petroquim PP PH 2621 | Petroquim S.A. | PP Homopolymer | Petroquim PP |
| Petrothene® KR92717 | LyondellBasell Industries | HDPE, HMW | Petrothene® |
