Order Products : sales@su-jiao.com

Baydur® 742 IBS (32 pcf)

Category:	PUR-MDI , Polyurethane (MDI)
Manufacturer:	Covestro - PUR
Trademark:	Baydur®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	YxXYbp_Baydur-742-IBS-32-pcf-.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Baydur 742 IBS is a semirigid polyurethane structural foam system used in the reaction injection molding (RIM) process. This system incorporates a specially engineered interactive blowing system (IBS) and is supplied as two reactive liquid components. Component A is a modified polymeric diphenylmethane diisocyanate (PMDI) prepolymer blend, and Component B is a formulated polyol system containing no CFC- or HCFC-blowing additives. Baydur 742 IBS system is used in the consumer products market for applications requiring some protective cushioning characteristics. The system is typically molded at medium-to-high densities. As with any product, use of the Baydur 742 IBS system in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability.

Message

Baydur 742 IBS is a semirigid polyurethane structural foam system used in the reaction injection molding (RIM) process. This system incorporates a specially engineered interactive blowing system (IBS) and is supplied as two reactive liquid components. Component A is a modified polymeric diphenylmethane diisocyanate (PMDI) prepolymer blend, and Component B is a formulated polyol system containing no CFC- or HCFC-blowing additives.

Baydur 742 IBS system is used in the consumer products market for applications requiring some protective cushioning characteristics. The system is typically molded at medium-to-high densities. As with any product, use of the Baydur 742 IBS system in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability.

General Information
Additive	Blowing Agent
Uses	Structural Foam
Processing Method	Reaction Injection Molding (RIM)

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.509	g/cm³	ASTM D792
Molding Shrinkage - Flow (12.7 mm)	0.90 to 1.1	%	ASTM D955

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore D, 12.7 mm)	41		ASTM D2240

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Break, 12.7 mm)	6.55	MPa	ASTM D638
Tensile Elongation (Break, 12.7 mm)	130	%	ASTM D638
Flexural Modulus (12.7 mm)	118	MPa	ASTM D790
Flexural Strength (12.7 mm)	6.55	MPa	ASTM D790
Compressive Strength (12.7 mm)	1.48	MPa	ASTM D695

Impact	Nominal Value	Unit	Test Method
Charpy Unnotched Impact Strength ¹	No Break		Internal Method

Note Message
1 .	0.5 in

Resin Grade	Manufacturer	Category	Trademark
Tecomid® NA40 GR30 NL RT	Eurotec Engineering Plastics	Nylon 66	Tecomid®
VITAMIDE® BT11BK6559	Jackdaw Polymers	Nylon 6	VITAMIDE®
NuSil CV7-1142-1	NuSil Technology	Silicone	NuSil
ALCOM® PA66 910/1 GF15 MR25	ALBIS PLASTIC GmbH	Nylon 66	ALCOM® PA66
Jampilen HP554P	Jam Polypropylene Company	PP Homopolymer	Jampilen