Order Products : sales@su-jiao.com
DENILUB Z 40M60 0Mo Y
| Category: | PPA+Nylon 66 , Polyphthalamide + Nylon 66 |
| Manufacturer: | Vamp Tech |
| Trademark: | DENILUB |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | YxIXDW_DENILUB-Z-40M60-0Mo-Y.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PPA/PA 66 40% mineral filled with molybdenum disulfide. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.54 | g/cm³ | ASTM D792 |
| Molding Shrinkage | ASTM D955 | ||
| Flow | 0.30 | % | |
| Across Flow | 0.40 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 14000 | MPa | ASTM D638 |
| Tensile Strength (Yield) | 125 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 1.7 | % | ASTM D638 |
| Coefficient of Friction | ASTM D1894 | ||
| Dynamic | 0.36 | ||
| Static | 0.32 | ||
| Wear Factor 1 | 26.0 | 10^-10 m³ h/N·m·h |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact Strength | 4.0 | kJ/m² | ISO 180/A |
| Unnotched Izod Impact Strength | 40 | kJ/m² | ISO 180 |
| Note Message | |
|---|---|
| 1 . | Thrust Washer |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Telcar® TL-2588G | Teknor Apex Company | TPE | Telcar® |
| KEBAFORM® C 520.0 | BARLOG plastics GmbH | Acetal (POM) Copolymer | KEBAFORM® C |
| OmniPro™ TPO MF17 SCR HSV | OMNI Plastics, LLC | TPO | OmniPro™ |
| OPTRENE 10GF | Ovation Polymers Inc. | PP, Unspecified | OPTRENE |
| Plaslube® PEI GF30 TL15 BK | Techmer Engineered Solutions | PEI | Plaslube® |
