Order Products : sales@su-jiao.com

MFE® -W3

Category:	Vinyl Ester , Vinyl Ester
Manufacturer:	Huachang Polymer Co., Ltd.
Trademark:	MFE®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	YvOLrW_MFE--W3.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

MFE-W3 is a novolac-based epoxy vinyl ester resin. It offers corrosion resistance at higher temperatures.

PROPERTY

High heat-resistance, heat distortion temperature of casting is 150°C and for FRP is 210°C.

Excellent anti-corrosion and superior stability to some solvents and oxidizing media.

Complies with FDA regulation 21 CFR 177.2420, when properly formulated and cured, for repeated use in food contact materials.

APPLICATION

Various corrosion resistant FRP products, such as chemical tank, pipe, served at elevated temperatures.

Used as the jointing material, resin mortar and special adhesive with chemical resistance.

Used as anti-corrosion FRP lining for the surface of metal or concrete.

Can be used in pultrusion, filament winding, spray up and hand lay- up process.

General Information
Features	Food Contact Acceptable Good Chemical Resistance Good Corrosion Resistance High Heat Resistance Oxidation Resistant Solvent Resistant
Uses	Adhesives Industrial Tanks Liners Piping
Agency Ratings	FDA 21 CFR 177.2420
Appearance	Yellow
Processing Method	Filament Winding Hand Lay-up Pultrusion Spraying

Physical	Nominal Value	Unit
Acid Value	6.00 to 14.00	mg KOH/g
Solids Content	62 to 68	%

Thermal	Nominal Value	Unit	Test Method
Thermal Stability (80°C)	> 1	day

Thermoset	Nominal Value	Unit
Gel Time (25°C)	10.0 to 20.0	min

Additional Information	Nominal Value	Unit
Gel to Peak	5.0 to 10.0	min
Peak Exotherm	160 to 180	°C

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	3600	MPa	ASTM D638
Tensile Strength	80.0	MPa	ASTM D638
Tensile Elongation (Break)	3.5	%	ASTM D638
Flexural Modulus	3600	MPa	ASTM D790
Flexural Strength	145	MPa	ASTM D790

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (1.8 MPa, Unannealed)	150	°C	ASTM D648

Thermoset	Nominal Value	Unit
Thermoset Mix Viscosity (25°C)	250 to 350	cP

Resin Grade	Manufacturer	Category	Trademark
Ultradur® B 4300 G10	BASF Corporation	PBT	Ultradur®
Complet® LGF30-PA6	PlastiComp, Inc.	Nylon 6	Complet®
Elastron® V V101.A35.N	Elastron USA, Inc.	TPV	Elastron® V
Jam HDPE HM9455F	Jam Petrochemical Company	HDPE	Jam HDPE
LNP™ STAT-KON™ DE003 compound	SABIC Innovative Plastics Asia Pacific	PC	LNP™ STAT-KON™