Order Products : sales@su-jiao.com
DISTRUMID 6 MV
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | Distrupol |
| Trademark: | DISTRUMID |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | YvDR3o_DISTRUMID-6-MV.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| DISTRUMID 6 MV is a polyamide 6 (nylon 6) material,. This product is available in Europe,. The main characteristics of DISTRUMID 6 MV are: flame retardant/rated flame. |
| General Information | |
|---|---|
| Forms |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Specific Gravity | 1.14 | -- | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 1.1 | -- | % | ASTM D955 |
| Water Absorption (24 hr) | 1.4 | -- | % | ASTM D570 |
| Hardness | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Rockwell Hardness (R-Scale) | 120 | 104 | ASTM D785 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Strength (Yield) | 80.0 | 40.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 220 | 270 | % | ASTM D638 |
| Flexural Modulus | 2800 | 900 | MPa | ASTM D790 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Notched Izod Impact | 50 | 800 | J/m | ASTM D256 |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | |||
| 0.45 MPa, not annealed | 180 | -- | °C | ASTM D648 |
| 1.8 MPa, not annealed | 75.0 | -- | °C | ASTM D648 |
| Vicat Softening Temperature | 205 | -- | °C | ASTM D1525 |
| Melting Temperature | 222 | -- | °C |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Surface Resistivity | 1.0E+13 | 1.0E+11 | ohms | ASTM D257 |
| Volume Resistivity | 1.0E+15 | 1.0E+11 | ohms·cm | ASTM D257 |
| Flammability | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Flame Rating | V-2 | -- | UL 94 |
| Additional Information |
|---|
| 干燥 Continuous Service Temperature, S.P., No Stress: 80 °CResistance to Tracking, VDE 0303/1: KC>450 V |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 2205 TFE 15 | RTP Company | PEEK | RTP |
| Telcar® TL-1336B | Teknor Apex Company | TPE | Telcar® |
| Generic PPS, Linear - Glass Fiber | Generic | PPS, Linear | Generic |
| ISPLEN® PB 140 G2M | REPSOL | PP Impact Copolymer | ISPLEN® |
| Sylvin 7833-90 Grey 9193 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
