Order Products : sales@su-jiao.com
Advanced Composites CHI-500
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | Advanced Composites, Inc. |
| Trademark: | Advanced Composites |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | YuT9c5_Advanced-Composites-CHI-500.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Advanced Composites CHI-500 is a polypropylene product,. It is available in North America. Typical application areas are: automotive industry. Features include:
|
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.960 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 27 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 64 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 18.9 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | 450 | % | ASTM D638 |
| Flexural Modulus 3 | 1060 | MPa | ASTM D790 |
| Flexural Strength 4 | 22.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| -29°C | 120 | J/m | ASTM D256 |
| 23°C | No Break | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 102 | °C | ASTM D648 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 82.2 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Rear Temperature | 171 | °C | |
| Middle Temperature | 179 - 199 | °C | |
| Front Temperature | 216 | °C | |
| Nozzle Temperature | 204 | °C | |
| Processing (Melt) Temp | 185 - 227 | °C | |
| Mold Temperature | 26.7 - 43.3 | °C | |
| Injection Rate | Slow-Moderate | ||
| Cushion | 5.00 - 10.0 | mm |
| Injection instructions |
|---|
| Injection Pressure: 20 to 60% of machione capacityScrew RPM: 1 to 2 secs before mold open |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 5.0 mm/min |
| 4 . | 5.0 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SCHULAMID® 612 HV H 5003 | A. Schulman Europe | Nylon 612 | SCHULAMID® |
| SPESIN® KP212G15VFBL | Kolon Plastics, Inc. | PBT | SPESIN® |
| LUVOCOM® 100-8758 | Lehmann & Voss & Co. | PUR, Unspecified | LUVOCOM® |
| POLIMAXX 1111NXBA4 | IRPC Public Company Limited | PP Homopolymer | POLIMAXX |
| OTECH PVC OC5817-Sandal | OTECH Corporation | PVC, Unspecified | OTECH PVC |
