Order Products : sales@su-jiao.com
Amodel® HFFR-4133
| Category: | PPA , Polyphthalamide |
| Manufacturer: | Solvay Specialty Polymers |
| Trademark: | Amodel® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | YuEgzS_Amodel-HFFR-4133.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Amodel HFFR-4133 is a 33% glass fiber reinforced, halogen-free, flame retardant polyphthalamide (PPA) resin, which improves the processing performance of electrical and electronic products. The UL94 test by Underwriters Laboratory of the United States rated the resin as V-0 and can be molded with warm water. High fluidity, wide process window, good surface appearance, especially for larger electrical components. This brand can withstand the harsh infrared reflow soldering process commonly used in the electronics industry. It is very suitable for connectors and other electrical equipment requiring surface mount technology (SMT).
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.46 | g/cm³ | ISO 1183/A |
| Molding Shrinkage | ISO 294-4 | ||
| Vertical flow direction | 1.3 | % | ISO 294-4 |
| Flow direction | 0.32 | % | ISO 294-4 |
| Water Absorption (24 hr) | 0.28 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 121 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 12000 | MPa | ISO 527-2 |
| Tensile Stress 1(Yield) | 145 - 160 | MPa | ISO 527-2 |
| Tensile Strain 2(Break) | 1.9 - 2.3 | % | ISO 527-2 |
| Flexural Modulus | 10800 | MPa | ISO 178 |
| Flexural Stress 3 | 220 - 230 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact 4 | 7.0 - 8.0 | kJ/m² | ISO 180/1A |
| Unnotched Izod Impact Strength 5 | 40 - 48 | kJ/m² | ISO 180/1U |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 300 | °C | ISO 75-2/Af |
| Linear thermal expansion coefficient | ASTM E831 | ||
| Flow : 0 to 90°C | 2.0E-5 | cm/cm/°C | ASTM E831 |
| Flow : 120 to 200°C | 1.2E-5 | cm/cm/°C | ASTM E831 |
| Lateral : 0 to 90°C | 8.0E-5 | cm/cm/°C | ASTM E831 |
| Horizontal : 120 to 200°C | 1.3E-4 | cm/cm/°C | ASTM E831 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity 6 | 1.3E+16 | ohms·cm | ASTM D257 |
| Dielectric Strength | ASTM D149 | ||
| 0.800 mm | 30 | kV/mm | ASTM D149 |
| 1.60 mm | 26 | kV/mm | ASTM D149 |
| Dielectric Constant | ASTM D150 | ||
| 100 Hz | 3.78 | ASTM D150 | |
| 1 MHz | 3.53 | ASTM D150 | |
| Dissipation Factor | ASTM D150 | ||
| 100 Hz | 5.0E-3 | ASTM D150 | |
| 1 MHz | 0.012 | ASTM D150 | |
| Comparative Tracking Index (CTI) | PLC 0 | UL 746 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating 7(0.800 mm) | V-0 | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 120 | °C | |
| Drying Time | 4.0 | hr | |
| Suggested Max Moisture | 0.030 - 0.060 | % | |
| Rear Temperature | 300 | °C | |
| Front Temperature | 325 | °C | |
| Processing (Melt) Temp | 340 - 350 | °C | |
| Mold Temperature | 90.0 - 110 | °C |
| Injection instructions |
|---|
| 射出速度： 3〜4英寸/秒 保压压力：射出压力的50% |
| Note Message | |
|---|---|
| 1 . | The values of natural color and BK324 color are high. |
| 2 . | The values of natural color and BK324 color are high. |
| 3 . | The values of natural color and BK324 color are high. |
| 4 . | The values of natural color and BK324 color are high. |
| 5 . | The values of natural color and BK324 color are high. |
| 6 . | Sample status: 95 ° F (35 ° C) , 90% RH, 96 hours |
| 7 . | These flammability ratings do not represent the risk of these materials or any other materials in actual fire situations. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TECHNO MUH C7103 | Techno Polymer Co, Ltd. | ABS | TECHNO MUH |
| Sylvin 8754-60FUV Black | Sylvin Technologies Incorporated | PVC, Flexible | Sylvin |
| KRATON® D1118 A | Kraton Polymers LLC | SBS | KRATON® |
| IDI SMC 46-16-60 | IDI Composites International | TS, Unspecified | IDI SMC |
| Jiangsu Sinarise EX9024X | Jiangsu Sinarise New Material Technology Co., Ltd | TPE | Jiangsu Sinarise |
