Order Products : sales@su-jiao.com
Devlon V-API
| Category: | TP, Unspecified , Thermoplastic |
| Manufacturer: | Devol® Engineering Polymers |
| Trademark: | Devlon |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | YkgIvA_Devlon-V-API.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Devlon V-API is a Thermoplastic material. It is available in Europe. Primary attribute of Devlon V-API: Flame Rated. |
| General Information | |
|---|---|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.14 | g/cm³ | ASTM D792 |
| Water Absorption | ASTM D570 | ||
| 24 hr | 0.11 | % | |
| Saturation | 3.0 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 112 | ASTM D785 | |
| Durometer Hardness (Shore D) | 78 to 80 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 4140 | MPa | ASTM D638 |
| Tensile Strength | ASTM D638 | ||
| -40°C | 110 | MPa | |
| 23°C | 79.9 | MPa | |
| Tensile Elongation (Break, 23°C) | 5.4 | % | ASTM D638 |
| Flexural Strength | 122 | MPa | ASTM D790 |
| Compressive Strength | 140 | MPa | ASTM D695 |
| Deformation Under Load (23°C, 14 MPa) | 1.00 to 2.00 | % | ASTM D621 |
| Compressive Yield Strength | 91.2 | MPa | ASTM D695 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Service Temperature | ASTM D570 | ||
| -- 1 | 125 | °C | |
| Short Term | 190 | °C |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ASTM D256 | ||
| -40°C | 19.8 | J/m | |
| 23°C | 54.8 | J/m |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed | 209 | °C | |
| 1.8 MPa, Unannealed | 93.0 | °C | |
| Melting Temperature | 216 | °C | ASTM D3418 |
| CLTE - Flow (30 to 100°C) | 1.1E-4 | cm/cm/°C | ASTM E831 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Strength | > 15 | kV/mm | ASTM D149 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | V-2 | UL 94 |
| Note Message | |
|---|---|
| 1 . | Long Term |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Nylene® 5133 | Custom Resins Group | Nylon 66 | Nylene® |
| HIDEN® VH035 | YUHWA Korea Petrochemical Ind. Co., Ltd. | UHMWPE | HIDEN® |
| ESTABLEND 6500 GF | Cossa Polimeri S.r.l. | PC+ABS | ESTABLEND |
| Huafon JF-A-AH5038 | Huafon Group Co., Ltd. | PUR, Unspecified | Huafon |
| Plexiglas® DR® | Altuglas International of Arkema Inc. | Acrylic (PMMA) | Plexiglas® |
