Order Products : sales@su-jiao.com
RTP 799 X 143520 B
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | YiM4oP_RTP799X143520B.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| ESD Protection - Permanently Anti-static - Preliminary Datasheet |
| General Information | |
|---|---|
| Features |
|
| RoHS Compliance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.960 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 15 - 18 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow (3.20 mm) | 1.0 - 3.0 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 414 | MPa | ASTM D638 |
| Tensile Strength | 14.5 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | > 10 | % | ASTM D638 |
| Flexural Modulus | 483 | MPa | ASTM D790 |
| Flexural Strength | 15.2 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.20 mm) | 80 | J/m | ASTM D256 |
| Unnotched Izod Impact (3.20 mm) | No Break | ASTM D4812 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | < 1.0E+11 | ohms | ASTM D257 |
| Volume Resistivity | < 1.0E+10 | ohms·cm | ASTM D257 |
| Static Decay 1 | sec | FTMS 101C 4046.1 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 79 | °C | |
| Drying Time | 2.0 | hr | |
| Processing (Melt) Temp | 193 - 232 | °C | |
| Mold Temperature | 21 - 66 | °C | |
| Injection Pressure | 68.9 - 103 | MPa |
| Injection instructions |
|---|
| Do not exceed 520 °F (270 °C) melt temperature.Desiccant Type Dryer Required. |
| Note Message | |
|---|---|
| 1 . | MIL-PRF-81705D, 5kV to 50 V, 12% RH |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SCANTEC PC S75R GF10 | Polykemi AB | PC | SCANTEC |
| Witcom ABS 3L1 | Witcom Engineering Plastics B.V. | ABS | Witcom ABS |
| Borealis PP HC600TF | Borealis AG | PP Homopolymer | Borealis PP |
| EMOPLEN® A 1125 T1 | EMAS Plastik San.Tic.AS. | PP, Unspecified | EMOPLEN® |
| TECHNYL® A 217 BLACK 61 | Solvay Engineering Plastics | Nylon 66 | TECHNYL® |
