Order Products : sales@su-jiao.com

Sasol Polymers PE LT014

Category:	LDPE , Low Density Polyethylene
Manufacturer:	Sasol Polymers
Trademark:	Sasol Polymers PE
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	Yg7tC3_Sasol-Polymers-PE-LT014.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Features

Tubular resin

Good flexibility

Good transparency

Applications

Injection moulded caps and closures

Masterbatch base

General Information
Features	Good flexibility Definition, high Compliance of Food Exposure
Uses	Shield Masterbatch Shell
Agency Ratings	EC 1935/2004 FDA 21 CFR 177.1520(a)(3)(i)(c)(1) FDA 21 CFR 177.1520(c) 3.1a
Appearance	Clear/transparent
Forms	Particle
Processing Method	Injection molding

Physical	Nominal Value	Unit	Test Method
Density	0.920	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	6.5	g/10 min	ASTM D1238
Environmental Stress-Cracking Resistance (100% Igepal CO-630, F50)	0.100	hr	ASTM D1693

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore D)	52		ASTM D2240

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ¹			ASTM D638
Yield	12.0	MPa	ASTM D638
Fracture	9.00	MPa	ASTM D638
Tensile Elongation ²(Break)	130	%	ASTM D638
Flexural Modulus	423	MPa	ASTM D790

Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature	96.0	°C	ASTM D1525

Injection	Nominal Value	Unit
Rear Temperature	160 - 200	°C
Middle Temperature	170 - 210	°C
Front Temperature	180 - 220	°C
Nozzle Temperature	200 - 230	°C
Processing (Melt) Temp	220 - 270	°C

Injection instructions
Zone 4: 190 to 230°C

Note Message
1 .	50 mm/min
2 .	50 mm/min

Resin Grade	Manufacturer	Category	Trademark
REPOL® H050MN	Reliance Industries Limited	PP Homopolymer	REPOL®
Colorite 88 Series 7088	Colorite Polymers	PVC, Unspecified	Colorite 88 Series
Elastron® D D100.A58.N	Elastron USA, Inc.	SBS	Elastron® D
HiFill® PEEK GF15	Techmer Engineered Solutions	PEEK	HiFill®
Kingfa PA6-M25G20	Kingfa	Nylon 6	Kingfa