Order Products : sales@su-jiao.com
PRIMATOP PP CO 200 NB
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | Amco Polymers |
| Trademark: | PRIMATOP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | YffAy1_PRIMATOP-PP-CO-200-NB.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
PRIMATOP PP CO 200 NB is a Polypropylene Impact Copolymer (PP Impact Copolymer) material. It is available in North America. Important attributes of PRIMATOP PP CO 200 NB are:
Typical applications include:
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.900 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 20 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 80 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 22.1 | MPa | ASTM D638 |
| Flexural Modulus - Tangent 2 | 1070 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| -30°C | 37 | J/m | |
| 0°C | 80 | J/m | |
| 23°C | No Break | ||
| Instrumented Dart Impact 3(-30°C, 12.7 mm, Total Energy) | 28.2 | J | ASTM D3763 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed | 79.4 | °C | |
| 1.8 MPa, Unannealed | 43.3 | °C |
| Note Message | |
|---|---|
| 1 . | Type I, 50 mm/min |
| 2 . | 13 mm/min |
| 3 . | 3.81 m/sec |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RELENE® F18020 | Reliance Industries Limited | LLDPE | RELENE® |
| METALCAP PPC372B73 | Polyram Ram-On Industries | PP Copolymer | METALCAP |
| DIAMALOY ASAPC GLY 130 | Network Polymers, Inc. | ASA+PC | DIAMALOY ASAPC |
| Plenco 06401 (Injection) | Plastics Engineering Co. | Phenolic | Plenco |
| DAI-EL™ G-7401 | DAIKIN AMERICA, INC. | Fluorelastomer | DAI-EL™ |
