Order Products : sales@su-jiao.com

Rigidex® P 450-HP60

Category:	PP Impact Copolymer , Polypropylene Impact Copolymer
Manufacturer:	INEOS Olefins & Polymers Europe
Trademark:	Rigidex® P
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	Ye11R3_Rigidex-P-450-HP60.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Rigidex® P 450-HP60 is a nucleated and antistatic high flow high impact copolymer specifically designed for very fast cycling, thin walled injection moulding applications. The Rigidex® P series of polypropylene resins are manufactured using the latest catalyst/process developments on Innovene P gas phase technology. As a result, they offer an industry leading balance between fluidity, rigidity and impact resistance. New nucleating technology leads to higher isotropy and subsequently lower warpage of the final objects. Applications: Very Thin Walled Technical Mouldings Yellow fat containers Housewares Benefits and Features: Very good impact, even below 0°C Low warpage Very high flowability Very short cycle time Antistatic

Message

Rigidex® P 450-HP60 is a nucleated and antistatic high flow high impact copolymer specifically designed for very fast cycling, thin walled injection moulding applications.
The Rigidex® P series of polypropylene resins are manufactured using the latest catalyst/process developments on Innovene P gas phase technology. As a result, they offer an industry leading balance between fluidity, rigidity and impact resistance.
New nucleating technology leads to higher isotropy and subsequently lower warpage of the final objects.

Applications:

Very Thin Walled Technical Mouldings

Yellow fat containers

Housewares

Benefits and Features:

Very good impact, even below 0°C

Low warpage

Very high flowability

Very short cycle time

Antistatic

General Information
Additive	Antistatic Nucleating Agent
Features	Antistatic Fast Molding Cycle High Flow High Impact Resistance Impact Copolymer Low Temperature Impact Resistance Low Warpage Medium Rigidity Nucleated
Uses	Containers Household Goods Thin-walled Parts
RoHS Compliance	Contact Manufacturer
Forms	Pellets
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	60	g/10 min	ISO 1133

Mechanical	Nominal Value	Unit	Test Method
Flexural Modulus (23°C)	1400	MPa	ISO 178

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact Strength			ISO 180/1A
-20°C	4.2	kJ/m²
23°C	6.2	kJ/m²

Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature (0.45 MPa, Unannealed)	105	°C	ISO 75-2/B

Resin Grade	Manufacturer	Category	Trademark
Styropor® F 495 E	BASF Corporation	PS (EPS)	Styropor®
SureSpec IP-200	Genesis Polymers	PP Impact Copolymer	SureSpec
NAXELL™ PC110-20G	MRC Polymers, Inc.	PC	NAXELL™
Flontech® FT-GR10-6	Guarniflon S.p.A. - Flontech Division	PTFE	Flontech®
LUVOCOM® 1/GF/20/TF/10/SI/2/NC	Lehmann & Voss & Co.	Nylon 66	LUVOCOM®