Order Products : sales@su-jiao.com
CERTENE™ LDI-2523
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Muehlstein |
| Trademark: | CERTENE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | YdkSzq_CERTENE-LDI-2523.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| LDI-2523 is a certified prime grade specially designed for Higher Flow INJECTION MOLDING / COMPOUNDING applications requiring good balance of mechanical and low warpage properties. LDI-2523 features easy processability over a wide range of molding conditions, good clarity, excellent flexibility, and high surface appearance of molded articles. LDI-2523 applications include housewares, lids, closures, overcaps, medical parts, and general purpose molded articles. Recommended processing temperature is 170 to 220°C., with mold at 20 to 40°C.. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.923 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 25 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 11.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | 100 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 3 | 283 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Impact Strength | 95.0 | kJ/m² | ASTM D1822 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -15.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 85.0 | °C | ASTM D1525 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 170 to 220 | °C | |
| Mold Temperature | 20.0 to 40.0 | °C |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Stylac™ 026 | Asahi Kasei Chemicals Corporation | ABS | Stylac™ |
| DENKA STYROL HRM-2S-311 | Denka Company Limited | PS (GPPS) | DENKA STYROL |
| DJSilicone NE-271 | DONGJUE SILICONE (NANJING) CO., LTD | Silicone | DJSilicone |
| Indothene HD 46GP009UV | Reliance Industries Limited | HDPE | Indothene HD |
| Nylux 6/ST1 | KMI Group, Inc. | Nylon 6 | Nylux |
