Order Products : sales@su-jiao.com

Tecnoflon® FOR 532

Category:	Fluorelastomer , Fluoroelastomer
Manufacturer:	Solvay Specialty Polymers
Trademark:	Tecnoflon®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	YbBKO8_Tecnoflon-FOR-532.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
TECNOFLON® FOR 532 is a medium viscosity cure incorporated fluoroelastomer copolymer. This grade is well suited for applications where excellent compression set and superior mold release, are required. It can be compounded to meet MIL-R83428B and other major fluoroelastomer specifications. Some of the basic properties of Tecnoflon® FOR 532 are: Very fast cure rate Excellent scorch safety Good mold flow Superior mold release Lack of mold fouling Very low compression set TECNOFLON® FOR 532 can be used for compression and transfer moulding of O-rings, gaskets, and seals. The product can be mixed using typical fluoroelastomers compounding ingredients and mixing can be accomplished with two-roll mills or internal mixers. The material can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods can be produced by a variety of rubber processing methods.

Message

TECNOFLON® FOR 532 is a medium viscosity cure incorporated fluoroelastomer copolymer. This grade is well suited for applications where excellent compression set and superior mold release, are required. It can be compounded to meet MIL-R83428B and other major fluoroelastomer specifications.

Some of the basic properties of Tecnoflon® FOR 532 are:

Very fast cure rate

Excellent scorch safety

Good mold flow

Superior mold release

Lack of mold fouling

Very low compression set

TECNOFLON® FOR 532 can be used for compression and transfer moulding of O-rings, gaskets, and seals. The product can be mixed using typical fluoroelastomers compounding ingredients and mixing can be accomplished with two-roll mills or internal mixers.
The material can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods can be produced by a variety of rubber processing methods.

General Information
Features	Copolymer Fast Cure Good Flow Good Mold Release Low Compression Set Medium Viscosity
Uses	Belts/Belt Repair Blending Gaskets Hose Profiles Seals Sheet
Appearance	Off-White
Forms	Slab
Processing Method	Calendering Compounding Compression Molding Extrusion Resin Transfer Molding

Physical	Nominal Value	Unit
Mooney Viscosity ¹(ML 1+10, 121°C)	45	MU
Fluorine Content ²	66	%

Note Message
1 .	Raw polymer
2 .	Raw polymer

Resin Grade	Manufacturer	Category	Trademark
ICORENE® 1613	ICO Polymers EMEA, A Division of A. Schulman	LMDPE	ICORENE®
LEXAN™ EXL1890T resin	SABIC Innovative Plastics	PC	LEXAN™
LNP™ LUBRICOMP™ DL0029E compound	SABIC Innovative Plastics	PC	LNP™ LUBRICOMP™
Sylvin 8200-75 Clear 876	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin
Petrothene® NA283245	LyondellBasell Industries	LDPE	Petrothene®