Order Products : sales@su-jiao.com
UBE Nylon 1015GC9
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | UBE Engineering Plastics, S.A. |
| Trademark: | UBE Nylon |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Yb7GHp_UBENylon1015GC9.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Reinforced with glass fiber |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Forms |
|
| Part Marking Code |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.50 | g/cm³ | ISO 1183 |
| Molding Shrinkage | Internal method | ||
| Vertical flow direction | 0.50 | % | Internal method |
| Flow direction | 0.10 | % | Internal method |
| Water Absorption (Equilibrium, 23°C, 50% RH) | 1.3 | % | Internal method |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 14800 | MPa | ISO 527-2 |
| Tensile Stress (Break) | 225 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 3.3 | % | ISO 527-2 |
| Flexural Modulus | 14500 | MPa | ISO 178 |
| Flexural Stress | 360 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Unnotched Impact Strength | 20 | kJ/m² | ISO 179 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, not annealed | 220 | °C | ISO 75-2/B |
| 1.8 MPa, not annealed | 210 | °C | ISO 75-2/A |
| CLTE - Flow | 2.0E-5 | cm/cm/°C | ISO 11359-2 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Relative Permittivity | 3.90 | IEC 60250 | |
| Arc Resistance | 138 | sec | ASTM D495 |
| Comparative Tracking Index (CTI) | PLC 1 | UL 746 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (0.760 mm) | HB | UL 94 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 2000 HC | RTP Company | PSU Alloy | RTP |
| HM10® S2 | Heritage Plastics, Inc. | LLDPE | HM10® |
| INELEC ABS SS10 | Infinity LTL Engineered Compounds | ABS | INELEC |
| INSULCAST® 136/INSULCURE 9 | ITW Polymers Coatings North America | Epoxy | INSULCAST® |
| Plaslube® PA6/6 GF30 IM TL15 | Techmer Engineered Solutions | Nylon 66 | Plaslube® |
