Order Products : sales@su-jiao.com

INEOS PP 540-CA13

Category:	PP Impact Copolymer , Polypropylene Impact Copolymer
Manufacturer:	INEOS Olefins & Polymers Europe
Trademark:	INEOS PP
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	Yav4pq_INEOS-PP-540-CA13.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
540-CA13 is a high impact copolymer polypropylene grade recommended for injection moulding of luggage, crates and boxes as well as for the production of compounds. This nucleated grade has a good stiffness, allows for a faster cooling and presents excellent dimensional stability. 540-CA13 contains antistatic agent. Benefits & Features Very good impact resistance at low temperature (-20°C) Low warpage Good flowability Antistatic Applications Returnable transport packaging (crates & boxes) Luggage Very low temperature impact resistant packages Compounds

Message

540-CA13 is a high impact copolymer polypropylene grade recommended for injection moulding of luggage, crates and boxes as well as for the production of compounds. This nucleated grade has a good stiffness, allows for a faster cooling
and presents excellent dimensional stability. 540-CA13 contains antistatic agent.
Benefits & Features

Very good impact resistance at low temperature (-20°C)

Low warpage

Good flowability

Antistatic

Applications

Returnable transport packaging (crates & boxes)

Luggage

Very low temperature impact resistant packages

Compounds

General Information
Additive	Antistatic
Features	Antistatic Good Flow Impact Copolymer Low Temperature Impact Resistance Low Warpage Ultra High Impact Resistance
Uses	Compounding Containers Crates Luggage
RoHS Compliance	Contact Manufacturer
Forms	Pellets
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	13	g/10 min	ISO 1133

Mechanical	Nominal Value	Unit	Test Method
Flexural Modulus (23°C)	1150	MPa	ISO 178

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact Strength
-30°C	7.7	kJ/m²	ISO 180
-20°C	9.5	kJ/m²	ISO 180/1A
23°C	50	kJ/m²	ISO 180/1A
Multi-Axial Instrumented Impact Energy (-20°C, Total Penetration Energy)	41.0	J	ISO 6603-2
Impact Strength (-20°C)	210	J/cm	ISO 6603-2

Resin Grade	Manufacturer	Category	Trademark
Sindustris ABS LPT381	Sincerity Australia Pty Ltd.	ABS	Sindustris ABS
TOTAL Polyethylene LDPE 1200 MN 18 C	TOTAL Refining & Chemicals	LDPE	TOTAL Polyethylene
Dryflex® CS 40A001N	ELASTO	SEBS	Dryflex®
Elastamax™ XL-2075	PolyOne Corporation	TPO (POE)	Elastamax™
Shida 2516	JINJIANG City SHIDA Plastic Fine Co., Ltd.	TPE	Shida