Order Products : sales@su-jiao.com

NuSil MED-1055

Category:	Silicone , Silicone
Manufacturer:	NuSil Technology
Trademark:	NuSil
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	Yabcqp_NuSil-MED-1055.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Restricted Healthcare Silicones Definition: NuSil Technology's restricted materials may be considered for use in short-term implant applications, 29 days or less, or for external applications. Silicone adhesives are elastomers or pressure sensitive adhesive systems that are designed to bond silicone surfaces to each other and to other substrate surfaces such as metals and plastics. There are one-part and two-part adhesives, ranging in consistency from flowable to non-flowable (non-slump). In general, silicone adhesives adhere well to substrates such as glass, aluminum, titanium, other silicones, and some ceramics. While various types of materials can be used as adhesives, silicones are consistently chosen for their many inherent properties and overall versatility. Comments: RTV, FLUOROSILICONE SEALANT

Message

Restricted Healthcare Silicones Definition: NuSil Technology's restricted materials may be considered for use in short-term implant applications, 29 days or less, or for external applications.

Silicone adhesives are elastomers or pressure sensitive adhesive systems that are designed to bond silicone surfaces to each other and to other substrate surfaces such as metals and plastics. There are one-part and two-part adhesives, ranging in consistency from flowable to non-flowable (non-slump).

In general, silicone adhesives adhere well to substrates such as glass, aluminum, titanium, other silicones, and some ceramics. While various types of materials can be used as adhesives, silicones are consistently chosen for their many inherent properties and overall versatility.

Comments: RTV, FLUOROSILICONE SEALANT

General Information
Features	Biocompatible Good Chemical Resistance Moisture Resistant Room Temperature Vulcanizing
Uses	Adhesives Medical/Healthcare Applications Sealants
Agency Ratings	USP Class VI

Additional Information	Nominal Value	Unit
Cure System	Acetoxy
Extrusion Rate	230	g/min

Uncured Properties	Nominal Value	Unit
Density	1.35	g/cm³
Curing Time (23°C)	72	hr
Pot Life (25°C)	15	min

Cured Properties	Nominal Value	Unit
Shore Hardness (Shore A)	35
Tensile Strength	5.65	MPa
Tensile Elongation at Break	400	%
Tear Strength	8.76	kN/m

Resin Grade	Manufacturer	Category	Trademark
Sindustris ABS LHI232H	Sincerity Australia Pty Ltd.	ABS	Sindustris ABS
Tefzel® 280	DuPont Fluoropolymers	ETFE	Tefzel®
Toyolac® 325	Toray Plastics (Malaysia) Sdn. Bhd.	ABS	Toyolac®
Fluoroplex B 60 - GML	UNIFLON	PTFE	Fluoroplex
3M™ Dyneon™ PTFE Compound TF 6262	3M Advanced Materials Division	PTFE	3M™ Dyneon™ PTFE Compound