Order Products : sales@su-jiao.com
Malen E FGNX 23-D022
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | LyondellBasell Industries |
| Trademark: | Malen |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Ya016u_Malen-E-FGNX-23-D022.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Malen E FGNX 23-D022 is suitable for manufacture of highly transparent, very fine films. ButBut also blow moulding or injection moulding is possibile due its rheological feature. Extruded films starting with a thickness of 25 microns exhibit very good mechnical properties and are notable for their high transparency and gloss. This product is not intended for use in medical and pharmaceutical applications. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.919 to 0.923 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 1.6 to 2.5 | g/10 min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Break) | 11.0 | MPa | ISO 8986-2 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 90.0 | °C | ISO 306 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| MAXAMID™ 7055 BK100 | Pier One Polymers, Inc. | Nylon 66 | MAXAMID™ |
| TEREZ PMMA 5504 SZ | TER HELL PLASTIC GMBH | Acrylic (PMMA) | TEREZ PMMA |
| Adell Polyamide BW-37 | Adell Plastics, Inc. | Nylon 6 | Adell Polyamide |
| Iupilon® DH3002R | Mitsubishi Engineering-Plastics Corp | PC | Iupilon® |
| PALMID® R 66 S GF 15 | pal plast GmbH | Nylon 66 | PALMID® |
