Order Products : sales@su-jiao.com

ELITE™ 5960G1

Category:	EPE , Enhanced Polyethylene Resin
Manufacturer:	The Dow Chemical Company
Trademark:	ELITE™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	YYLGzE_ELITE5960G1.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Main Characteristics:

HDPE with excellent moisture barrier, low dusting propensity

Great processability; low back pressure and exceptional bubble stability

Complies with:

U.S. FDA 21 CFR 177.1520 (c) 2.2

EU, No 10/2011

Consult the regulations for complete details.

General Information
Agency Ratings	FDA 21 CFR 177.1520(c) 2.2 Europe No 10/2011
Forms	Particle

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.962	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	0.85	g/10 min	ASTM D1238

Films	Nominal Value	Unit	Test Method
Film Thickness - Tested	50	µm
secant modulus			ASTM D882
2% secant, MD	850	MPa	ASTM D882
2% secant, TD	929	MPa	ASTM D882
Dart Drop Impact	130	g	ASTM D1709A
Elmendorf Tear Strength ¹			ASTM D1922
MD	41	g	ASTM D1922
TD	170	g	ASTM D1922

Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature	130	°C	ASTM D1525
Melting Temperature (DSC)	134	°C	Internal method

Optical	Nominal Value	Unit	Test Method
Gloss (45°)	13		ASTM D2457
Haze	53	%	ASTM D1003

Extrusion instructions
Fabrication Conditions For Blown Film:Screw Size: 3.5 inScrew Type: DSB IIDie Gap: 70 mil (1.7 mm)Melt Temperature: 425°FOutput: 12 lb/hr/in of die circumferenceDie Diameter: 8 in.Blow-Up Ratio: 2.5 to 1Frost Line Height: 33 in.

Note Message
1 .	Method B

Resin Grade	Manufacturer	Category	Trademark
Maxelast® P2740	Nantong Polymax Elastomer Technology, Co., Ltd	TPE	Maxelast®
MegaCarb® PC-FR510	Mega Polymers	PC	MegaCarb®
Telcar® TL-1654A	Teknor Apex Company	TPE	Telcar®
EL-Lene™ H5818J	SCG Chemicals Co., Ltd.	HDPE	EL-Lene™
Sylvin 9067-90 RED 604	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin