Order Products : sales@su-jiao.com
Sorta Clear® 18
| Category: | Silicone , Silicone |
| Manufacturer: | Smooth-On, Inc |
| Trademark: | Sorta Clear® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | YWOhQH_Sorta-Clear-18.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
SORTA-Clear® 18 is a premium water white translucent silicone rubber (platinum catalyst) that cures at room temperature with negligible shrinkage. A softer version of our popular SORTA-Clear® 40, this rubber has a Shore hardness of 18A and features exceptional tear and tensile strength. SORTA-Clear® rubber is ideal for making prototype, jewelry or other molds of any configuration where model visibility is important (i.e. extracting a model from the mold via cutting). Materials such as urethane, epoxy or polyester resins can then be cast into SORTA-Clear® silicone without application of a release agent. Other materials such as wax and low melt metal alloys can also be cast into SORTA-Clear®. SORTA-Clear® can be pigmented with SILC Pig® silicone pigments. Sorta Clear® 18 is also FOOD SAFE and can be used for culinary applications including casting chocolate and other confections |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.08 | g/cm³ | ASTM D1475 |
| Specific Volume | 0.925 | cm³/g | ASTM D1475 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Cure Time | 1.0 | day |
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Molding Shrinkage - Flow | < 0.10 | % | ASTM D2566 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 18 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain) | 0.241 | MPa | ASTM D412 |
| Tensile Strength (Break) | 2.93 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 550 | % | ASTM D412 |
| Tear Strength 1 | 14.0 | kN/m | ASTM D624 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Components | |||
| Part A | Mix Ratio by Weight: 100 | ||
| Part B | Mix Ratio by Weight: 10 | ||
| Pot Life (23°C) | 60 | min | ASTM D2471 |
| Thermoset Mix Viscosity | 21000 | cP | ASTM D2393 |
| Note Message | |
|---|---|
| 1 . | Die B |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SITRALIN 15E-TF15-HK-GS5 / black | SITRAPLAS GmbH | ASA+Nylon | SITRALIN |
| EVATHENE® UE649-04 | USI Corporation | EVA | EVATHENE® |
| Escorene™ Ultra FL 00018 | ExxonMobil Chemical | EVA | Escorene™ Ultra |
| LAMINEX® 2141 | Schwartz Technical Plastic | PF | LAMINEX® |
| LUBEMID B27 NATURAL UV | LUBEN PLAST srl | Nylon 6 | LUBEMID |
