Order Products : sales@su-jiao.com
Thermoset Plastics 300 No.18
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Thermoset, Lord Chemical Products |
| Trademark: | Thermoset Plastics |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | YTdwDh_Thermoset-Plastics-300-No-18.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Thermoset Plastics 300 No.18 is an Epoxy; Epoxide (Epoxy) material. It is available in North America for casting or encapsulating. Important attributes of Thermoset Plastics 300 No.18 are:
Typical application of Thermoset Plastics 300 No.18: Wire & Cable |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.55 | g/cm³ | ASTM D792 |
| Water Absorption (24 hr) | 0.15 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 90 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 59.3 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | 2.4 | % | ASTM D638 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 19 | J/m | ASTM D256 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 2.0E+16 | ohms·cm | ASTM D257 |
| Dielectric Constant (1 MHz) | 4.10 | ASTM D150 | |
| Dissipation Factor (1 MHz) | 0.022 | ASTM D150 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Components | |||
| Hardener | Mix Ratio by Weight: 7.0 | ||
| Resin | Mix Ratio by Weight: 100 | ||
| Thermoset Mix Viscosity (25°C) | 12000 | cP | ASTM D2393 |
| Demold Time (25°C) | 1400 | min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TABOREN PC 84 T 20 | SILON s.ro | PP Copolymer | TABOREN |
| Network Polymers PP PPB 25 0202 | Network Polymers, Inc. | PP Copolymer | Network Polymers PP |
| Estane® 2103-90AE TPU | Lubrizol Advanced Materials, Inc. | TPU-Polyether | Estane® |
| ALCOM® POM 770/1 PTFE10 | ALBIS PLASTIC GmbH | Acetal (POM) Copolymer | ALCOM® POM |
| Durethan® BKV 30 DUS000 000000 | LANXESS GmbH | Nylon 6 | Durethan® |
