Order Products : sales@su-jiao.com
YUPLENE® B391G
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | SK Global Chemical |
| Trademark: | YUPLENE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | YN1GLN_YUPLENE-B391G.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| YUPLENE B391G is a propylene impact copolymer designed for injection molding applications. YUPLENE B391G has high stiffness, excellent dimensional stability, good impact strength and very high flowability. This is not a chemical cracked grade so it is free from surface gas mark. YUPLENE B391G is especially suitable for various electrical appliances, large products and thin wall products. YUPLENE B391G complies with FDA regulation 21 CFR177.1520. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 40 | g/10 min | ASTM D1238 |
| Spiral Flow | > 80.0 | cm | Internal Method |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 90 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 25.5 | MPa | ASTM D638 |
| Tensile Elongation (Break) | < 500 | % | ASTM D638 |
| Flexural Modulus | 1270 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| -20°C | 49 | J/m | |
| 23°C | 74 | J/m |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Accelerated Oven Aging - in Air (150°C) | 15.0 | day | ASTM D3012 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | 110 | °C | ASTM D648 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| DuPont Impact Strength (-10°C) | > 1.96 | J | ASTM D2794 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 150 | °C | ASTM D1525 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Rilsan® AZM 23 T6LD | Arkema | Nylon 12 | Rilsan® |
| WPP PP PPC6TF1V-RXF | Washington Penn Plastic Co. Inc. | PP Copolymer | WPP PP |
| Grilamid® 2D 20 nat | EMS-GRIVORY | Nylon 612 | Grilamid® |
| Kazan HDPE PEBOB-7D1K | Kazanorgsintez Joint Stock Company | HDPE | Kazan HDPE |
| 3M™ Dyneon™ PTFE Compound APNV063 | 3M Advanced Materials Division | PTFE | 3M™ Dyneon™ PTFE Compound |
