Order Products : sales@su-jiao.com
Advanced Composites ADX-5016
| Category: | TPO , Compounded Polypropylene |
| Manufacturer: | Advanced Composites, Inc. |
| Trademark: | Advanced Composites |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | YM5zyv_Advanced-Composites-ADX-5016.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Advanced Composites ADX-5016 is a composite polypropylene product,. It is available in North America. Typical application areas are: automotive industry. Features include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.04 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 20 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 60 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 18.0 | MPa | ISO 527-2 |
| Flexural Modulus | 2000 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ISO 180 | ||
| -40°C | 5.0 | kJ/m² | ISO 180 |
| 23°C | 25 | kJ/m² | ISO 180 |
| Instrumented Dart Impact 1(-30°C) | 34.0 | J | ASTM D3763 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (0.45 MPa, Unannealed) | 111 | °C | ISO 75-2/B |
| Additional Information |
|---|
| Instrumented Dart Impact, ASTM D3763, -30°C, 6.7 m/s, (# Ductile: 30/30): >34 JScratch Resistance, FLTM BN108-13: >15 N |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 100 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Rear Temperature | 204 | °C | |
| Middle Temperature | 218 | °C | |
| Front Temperature | 218 | °C | |
| Nozzle Temperature | 216 | °C | |
| Processing (Melt) Temp | 204 - 232 | °C | |
| Mold Temperature | 48.9 - 60.0 | °C | |
| Cushion | 6.35 - 12.7 | mm |
| Injection instructions |
|---|
| Injection Pressure: 10% over max fill pressureHolding Pressure: 50 to 60% of max fill pressureInjection Speed: 1 to 3 inches/secScrew RPM: 1 to 2 secs before mold open |
| Note Message | |
|---|---|
| 1 . | 6.70 m/sec |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SumiDurez 156 | SumiDurez Singapore Pte Ltd | Phenolic | SumiDurez |
| Cri-Line IF-715-75 | Cri-Tech, Inc. | Fluorelastomer | Cri-Line |
| HOPELEN Y-120 | Lotte Chemical Corporation | PP Homopolymer | HOPELEN |
| INSTRUC PVDFCF15 | Infinity LTL Engineered Compounds | PVDF | INSTRUC |
| Sylvin 8925-70 BLACK | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
