Order Products : sales@su-jiao.com
SABIC® PPcompound 7700
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | Saudi Basic Industries Corporation (SABIC) |
| Trademark: | SABIC® PPcompound |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | YKCiBR_SABICPPcompound7700.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
SABIC® PPcompound 7700 is a mineral filled modified polypropylene. This material combines high stiffness, good impact and high flow with good paintability. This material has a very broad processing window combined with good esthical performance. Typical applications include painted and non esthetic automotive interior parts such as instrument panels, lower and upper dashboard, door panels and trim. SABIC® PPcompound 7700 is a designated automotive grade. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.04 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 20 | g/10 min | ISO 1133 |
| Molding Shrinkage (24 hr) | 0.75 | % | Internal method |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, Injection Molded) | 60 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 527-2/5/50 | ||
| Yield, 3.20mm, injection molding | 22.0 | MPa | ISO 527-2/5/50 |
| Fracture, 3.20mm, injection molding | 17.0 | MPa | ISO 527-2/5/50 |
| Tensile Strain (Break, 3.20 mm, Injection Molded) | 500 | % | ISO 527-2/5/50 |
| Flexural Modulus 1(Injection Molded) | 1900 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C, Injection Molded) | No Break | ISO 179/1eA | |
| Charpy Unnotched Impact Strength (-40°C, Injection Molded) | 20 | kJ/m² | ISO 179/1eU |
| Notched Izod Impact | ISO 180/4A | ||
| -20°C, injection molding | 6.0 | kJ/m² | ISO 180/4A |
| 0°C, injection molding | 6.0 | kJ/m² | ISO 180/4A |
| 23°C, injection molding | 20 | kJ/m² | ISO 180/4A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (0.45 MPa, Unannealed) | 105 | °C | ISO 75-2/B |
| Vicat Softening Temperature | 130 | °C | ISO 306/A |
| CLTE - Flow | ASTM D696 | ||
| -30 to 30°C | 6.0E-5 | cm/cm/°C | ASTM D696 |
| 23 to 80°C | 8.0E-5 | cm/cm/°C | ASTM D696 |
| Note Message | |
|---|---|
| 1 . | Method I (three-point load) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SUSTAPEEK MG blue | Röchling Sustaplast SE & Co. KG | PEEK | SUSTAPEEK |
| Devcon Floor Grip™ | Devcon | Epoxy | Devcon |
| LEXAN™ 143 resin | SABIC Innovative Plastics | PC | LEXAN™ |
| PLUSTEK PB350M6 | Polyram Ram-On Industries | Nylon 6 | PLUSTEK |
| TABOREN® PR 65 T 10S-089 | SILON s.r.o. | PP+PE | TABOREN® |
