Order Products : sales@su-jiao.com

Flexane® High Performance Putty

Category:	PUR, Unspecified , Polyurethane
Manufacturer:	Devcon
Trademark:	Flexane®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	YHfgxx_Flexane-High-Performance-Putty.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

A tough, rubber-like urethane compound for making a broad range of repairs to protect against wear, abrasion, and noise reduction.

Intended Use:

Protect equipment surfaces from wear and abrasion.

Protect processing equipment such as coating hoppers, lining chutes, pump volutes, impellers, and fan housings.

Product features:

Excellent tear resistance

Mixes easily

Bonds (with primers) to metal, concrete, rubber, wood, and fiberglass

Highly resistant to impact and abrasion

Trowels on smoothly

General Information
Features	Impact resistance, high Good tear strength Good wear resistance Good toughness
Uses	Repair Materials
Appearance	Black

Physical	Nominal Value	Unit	Test Method
Specific Volume	0.849	cm³/g
Solid content- by Volume	88	%

Mechanical	Nominal Value	Unit	Test Method
Abrasion Loss	140	mg/1000 cycles

Thermal	Nominal Value	Unit
Maximum Operating Temperature
Dry	82	°C
Wet	49	°C

Physical	Nominal Value	Unit	Test Method
Molding Shrinkage - Flow	12	%	ASTM D2566

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A)	78		ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Strength	31.0	MPa	ASTM D412
Tensile Elongation (Break)	600	%	ASTM D412
Tear Strength	70.1	kN/m	ASTM D624

Electrical	Nominal Value	Unit	Test Method
Dielectric Strength	14	kV/mm	ASTM D149

Thermoset	Nominal Value	Unit
Thermoset Components
Resin	Mixing ratio by weight: 94
Hardening method	Mixing ratio by weight: 6.0
Pot Life (24°C)	10	min
Demold Time	600	min

Additional Information
Cured 7 days @ 75°F

Uncured Properties	Nominal Value	Unit
Curing Time	16	hr

Resin Grade	Manufacturer	Category	Trademark
Vydyne® 41H	Ascend Performance Materials Operations LLC	Nylon 66	Vydyne®
ALTECH® PP-H A 2020/550 GF20 CP	ALBIS PLASTIC GmbH	PP Homopolymer	ALTECH® PP-H
Durez® 152 (Injection)	Sumitomo Bakelite North America, Inc.	Phenolic	Durez®
ICORENE® 1761 Black 9005	ICO Polymers EMEA, A Division of A. Schulman	mMDPE	ICORENE®
ADVANCENE™ EM-4925-AAH	ETHYDCO	HDPE	ADVANCENE™