Order Products : sales@su-jiao.com
Multi-Flex® TPE A9002
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Multibase, A Dow Corning Company |
| Trademark: | Multi-Flex® TPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | YH6IUg_Multi-Flex-TPE-A9002.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Multi-Flex® TPE A9002 is a Thermoplastic Elastomer (TPE) product. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Typical application: Automotive. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.987 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 7.3 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 10 sec) | 84 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Modulus | 89.6 | MPa | ASTM D790 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 11.0 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 680 | % | ASTM D412 |
| Tear Strength | 57.8 | kN/m | ASTM D624 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 65.6 | °C | |
| Drying Time | 1.0 to 2.0 | hr | |
| Rear Temperature | 193 | °C | |
| Middle Temperature | 204 | °C | |
| Front Temperature | 216 | °C | |
| Nozzle Temperature | 216 | °C | |
| Processing (Melt) Temp | 216 | °C | |
| Mold Temperature | 26.7 to 43.3 | °C | |
| Injection Rate | Moderate-Fast |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Mineralblend® PP-1400 | Colour Image Plastic Compound Sdn. Bhd. (CIPC) | PP Homopolymer | Mineralblend® |
| Nypol® PA B3 HL UV PRTA011 NT340 | Petropol Industry and Trade of Polymers LTDA | Nylon 6 | Nypol® PA |
| ALCOM® PC 740/4.2 UV WT1090-08LD2 | ALBIS PLASTIC GmbH | PC | ALCOM® PC |
| Durez® 156 (Injection) | Sumitomo Bakelite North America, Inc. | Phenolic | Durez® |
| Kuraray Poval® PVA CST | Kuraray Co., Ltd. | PVOH | Kuraray Poval® |
