Order Products : sales@su-jiao.com
DILAMID® 6 BLACK
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | Dilaplast S.p.A. |
| Trademark: | DILAMID® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | YGqhP9_DILAMID-6-BLACK.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| DILAMID®6 BLACK is a polyamide 6 (nylon 6) material,. This product is available in Europe, and the processing method is injection molding. DILAMID®6 The main characteristics of BLACK are: medium viscosity. |
| General Information | |
|---|---|
| Features |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.14 | g/cm³ | ISO 1183 |
| Molding Shrinkage - Flow | 1.2 - 1.6 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 65.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 20 | % | ISO 527-2 |
| Flexural Modulus | 2.40 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 6.0 | kJ/m² | ISO 180 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 60.0 | °C | ISO 75-2/A |
| Vicat Softening Temperature | 185 | °C | ISO 306/B50 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Strength | 18 | kV/mm | ASTM D149 |
| Comparative Tracking Index | 500 | V | IEC 60112 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Glow Wire Ignition Temperature (2.00 mm) | 750 | °C | IEC 60695-2-13 |
| Additional Information |
|---|
| Available also in version WW (Elastomer modified free conditioning) and ELT (Elastomer modified high impact).Notched Izod Impact Strength, ISO 180, 23°C: >6 kJ/m²Tensile Strain at Break, ISO 527-1, -2: >20%Comparative Track Index, IEC 60112: >500 V |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 70.0 - 90.0 | °C | |
| Drying Time | 2.0 - 8.0 | hr | |
| Suggested Max Moisture | 0.20 | % | |
| Rear Temperature | 220 - 250 | °C | |
| Middle Temperature | 230 - 270 | °C | |
| Front Temperature | 235 - 275 | °C | |
| Nozzle Temperature | 230 - 270 | °C | |
| Processing (Melt) Temp | 235 - 275 | °C | |
| Mold Temperature | 60.0 - 90.0 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| VESTOSINT® 1141 colored | Evonik Industries AG | Nylon 12 | VESTOSINT® |
| Anjacom® 055/80-GF20 Natural | Almaak International GmbH | PC+ABS | Anjacom® |
| Durethan® BKV 315 Z H2.0 901510 | LANXESS Asia/Pacific | Nylon 6 | Durethan® |
| Lucky Enpla LAY3000 | Lucky Enpla Co LTD | PC+PBT | Lucky Enpla |
| Durethan® DP A 30 S FN30 DUS025 000000 | LANXESS Asia/Pacific | Nylon 66 | Durethan® |
