Order Products : sales@su-jiao.com

Marlex® HXM 50100

Category:	HDPE, HMW , High Density (HMW) Polyethylene
Manufacturer:	Chevron Phillips Chemical Company LLC
Trademark:	Marlex®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	YGb7B8_Marlex-HXM-50100.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Marlex® HXM 50100 is a High Density (HMW) Polyethylene material. It is available in Europe, Latin America, or North America for blow molding, extrusion, or thermoforming.

Important attributes of Marlex® HXM 50100 are:

Flame Rated

Food Contact Acceptable

Hexene Comonomer

High ESCR (Stress Crack Resistant)

High Molecular Weight

Typical applications include:

Automotive

Containers

Tanks

Agricultural

Bags/Liners

General Information
Features	Durable Food Contact Acceptable Good Melt Strength Hexene Comonomer High ESCR (Stress Crack Resist.) Low Temperature Impact Resistance Medium Rigidity Ultra High Molecular Weight
Uses	Agricultural Applications Agricultural Tanks Automotive Applications Blown Containers Containers Fuel Tanks Liners Outdoor Furnishings Pallets Shipping Containers
Agency Ratings	ASTM D 4976-PE235 FDA 21 CFR 177.1520(c) 3.2a NSF 61
UL File Number	E54700
Forms	Pellets
Processing Method	Blow Molding Extrusion Thermoforming

Physical	Nominal Value	Unit	Test Method
Density	0.948	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/21.6 kg)	10	g/10 min	ASTM D1238
Environmental Stress-Cracking Resistance (100% Igepal, Compression Molded, F50)	> 600	hr	ASTM D1693B

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore D, Compression Molded)	68		ASTM D2240

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ¹(Yield, Compression Molded)	25.0	MPa	ASTM D638
Tensile Elongation ²(Break, Compression Molded)	700	%	ASTM D638
Flexural Modulus - Tangent ³(Compression Molded)	1200	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Tensile Impact Strength ⁴(Compression Molded)	190	kJ/m²	ASTM D1822

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (0.45 MPa, Unannealed, Compression Molded)	78.0	°C	ASTM D648
Brittleness Temperature	< -75.0	°C	ASTM D746A
Vicat Softening Temperature	126	°C	ASTM D1525 ⁵

Flammability	Nominal Value		Test Method
Flame Rating	HB		UL 94

Note Message
1 .	Type IV, 51 mm/min
2 .	Type IV, 51 mm/min
3 .	13 mm/min
4 .	Type S
5 .	Rate A (50°C/h), Loading 1 (10 N)

Resin Grade	Manufacturer	Category	Trademark
Sinvicomp SBB3715UV	Teknor Apex Asia Pacific PTE. LTD.	PVC, Rigid	Sinvicomp
Vyncolit® 2530W	Vyncolit N.V.	Phenolic	Vyncolit®
BJB Polyurethane WC-780 A/B	BJB Enterprises, Inc.	PUR, Unspecified	BJB Polyurethane
Celstran® PA66-GF40-01	Celanese Corporation	Nylon 66	Celstran®
DJSilicone NE-341	DONGJUE SILICONE (NANJING) CO., LTD	Silicone	DJSilicone