Order Products : sales@su-jiao.com
Sumikon® PM-TX130
| Category: | Phenolic , Phenolic |
| Manufacturer: | SBHPP |
| Trademark: | Sumikon® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | YGB74x_SumikonPMTX130.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| SUMIKON PM-TX130 is a Heat dissipative themoset molding compounds, Electrical insulative based on Phenolic polymer. It is supplied in the form of Granular/Molding Powder for Molding. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 2.73 | g/cm³ | JIS K6911 |
| Molding Shrinkage - Flow | 0.19 | % | JIS K6911 |
| Water Absorption (Equilibrium) | 0.19 | % | JIS K6911 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Modulus | 9000 | MPa | JIS K6911 |
| Flexural Strength | 40.0 | MPa | JIS K6911 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | 2.0 | kJ/m² | JIS K6911 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 183 | °C | JIS K6911 |
| Thermal Conductivity | 3.0 | W/m/K |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Strength 1 | 11 | kV/mm | JIS K6911 |
| Arc Resistance | 183 | sec | JIS K6911 |
| Comparative Tracking Index | 250 | V | IEC 60112 |
| Insulation Resistance | JIS K6911 | ||
| -- 2 | 1.0E+12 | ohms | JIS K6911 |
| -- 3 | 1.0E+11 | ohms | JIS K6911 |
| Note Message | |
|---|---|
| 1 . | Method B (step by step) |
| 2 . | As molded |
| 3 . | After boiling |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TAROMID A 280 G2 X0 | Taro Plast S.p.A. | Nylon 66 | TAROMID A |
| XANTAR® SF 22 (Foamed) | Mitsubishi Engineering-Plastics Corp | PC | XANTAR® |
| UMG ABS® EX18A | UMG ABS, Ltd. | ABS | UMG ABS® |
| UNITREX® CM3801 | Nytef Plastics, Ltd. | PEEK | UNITREX® |
| Nucrel® 0910HS | DuPont Packaging & Industrial Polymers | EMAA | Nucrel® |
