Order Products : sales@su-jiao.com

KRATON® G1645 M

Category:	SEBS , Styrene Ethylene Butylene Styrene Block Copolymer
Manufacturer:	Kraton Polymers LLC
Trademark:	KRATON®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	YFlzoM_KRATON-G1645-M.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Kraton G1645 M is a linear triblock copolymer based on styrene and ethylene/butylene. It is supplied from North America in the physical form identified below. Kraton G1645 MO - supplied as a dusted, dense pellet The product exhibits the following characteristics: Supplied as a dusted, dense pellet in small plastic bags. Enhanced midblock for increased compatibility with the polypropylene. Good UV and thermal stability as with all KRATON G type products. Low melt flow designed for stability in blown film applications.

Message

Kraton G1645 M is a linear triblock copolymer based on styrene and ethylene/butylene. It is supplied from North America in the physical form identified below.

Kraton G1645 MO - supplied as a dusted, dense pellet

The product exhibits the following characteristics:

Supplied as a dusted, dense pellet in small plastic bags.

Enhanced midblock for increased compatibility with the polypropylene.

Good UV and thermal stability as with all KRATON G type products.

Low melt flow designed for stability in blown film applications.

General Information
Additive	Antioxidant
Features	Antioxidant Copolymer Good Thermal Stability Good UV Resistance Low Flow
Uses	Film
Forms	Pellets
Processing Method	Blown Film

Physical	Nominal Value	Unit	Test Method
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	2.0 to 4.5	g/10 min	ASTM D1238
Bound Styrene	11.5 to 13.5	%	Internal Method
Antioxidant Additive ¹	0.080 to 0.16	%	Internal Method
Total Extractables	< 1.6	%	Internal Method
Volatile Matter	< 1.0	%	Internal Method

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A, 10 sec, Injection Molded)	35		ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Strength (Break)	10.3	MPa	ASTM D412
Tensile Elongation (Break)	600	%	ASTM D412

Note Message
1 .	Non-staining phenolic antioxidant

Resin Grade	Manufacturer	Category	Trademark
Tecnoprene® 3K3F NAT005	SO.F.TER. SPA	PP Copolymer	Tecnoprene®
Moplen EP549N	HMC Polymers	PP Impact Copolymer	Moplen
Bergamid™ NN-33GF/000 BLACK	PolyOne Corporation	Nylon 66	Bergamid™
Lushan M-8D	Guangzhou Lushan New Materials Co., Ltd	Polyolefin, Unspecified	Lushan
LNP™ COLORCOMP™ HMG47MDC compound	SABIC Innovative Plastics	ABS	LNP™ COLORCOMP™