Order Products : sales@su-jiao.com
BCC Resins BC 7069-1
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | BCC Products Inc. |
| Trademark: | BCC Resins |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | YFM1qB_BCC-Resins-BC-7069-1.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| BC 7069-1 is an aluminum filled, epoxy mass casting resin. This room temperature cure system may be cast to a thickness of ¾ inch in non-conductive molds and one inch in metal molds without foaming or yielding excessive shrinkage. Casting thickness can be increased by incorporating aluminum needles, puffs or granules. BC 7069-1 when properly cured, provides nearly perfect reproduction, resulting in a dimensionally stable, hard, tough surface. For use in constructing duplicate models, prototypes, patterns, facing dies. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | |||
| -- | 1.71 | g/cm³ | ASTM D792 |
| -- | 1.72 | g/cm³ | ASTM D1505 |
| Molding Shrinkage - Flow | 0.020 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 88 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Ultimate) | 44.8 | MPa | ASTM D638 |
| Flexural Strength (Break) | 73.1 | MPa | ASTM D790 |
| Compressive Strength | 103 | MPa | ASTM D695 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 55.0 | °C | ASTM D648 |
| CLTE - Flow | 6.4E-5 | cm/cm/°C | ASTM D696 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Components | |||
| Hardener | Mix Ratio by Weight: 10, Mix Ratio by Volume: 18 | ||
| Resin | Mix Ratio by Weight: 100, Mix Ratio by Volume: 100 | ||
| Pot Life (24°C) | 80 to 90 | min | |
| Thermoset Mix Viscosity (24°C) | 11000 | cP | ASTM D2393 |
| Demold Time (24°C) | 720 to 960 | min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Manner Flexible PVC C8090 UVAF CL | Manner Plastics, L.P. | PVC, Flexible | Manner Flexible PVC |
| Texalan® 3 Series 365A | Austin Novel Materials Co. Ltd. | TPU-Polyester | Texalan® 3 Series |
| Nylene® 8100 | Custom Resins Group | Nylon 612 | Nylene® |
| Fiberfil® M-2450 | Fiberfil® Engineered Plastics Inc. | PP Copolymer | Fiberfil® |
| K-Bin Rigid PVC KB-2007 | K-Bin, Inc. | PVC, Rigid | K-Bin Rigid PVC |
