Order Products : sales@su-jiao.com
Axiall PVC CL-6380
| Category: | PVC, Rigid , Rigid Polyvinyl Chloride |
| Manufacturer: | Axiall Corporation |
| Trademark: | Axiall PVC |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | YFBZRK_Axiall-PVC-CL-6380.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Georgia Gulf CL-6380 is a clear fittings compound. Georgia Gulf 6380 is ideally suited for use where visual monitoring of the process is needed. Georgia Gulf 6380 is listed with NSF under Standard 14, and meets Standard 61 Health effect requirements. |
| General Information | |
|---|---|
| Uses |
|
| Agency Ratings |
|
| UL File Number |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.35 to 1.39 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 0.20 to 0.40 | % | ASTM D955 |
| PVC Cell Classification | 11443 | ASTM D1784 | |
| Flow Ratio 1(199 to 204°C) | 150 | Internal Method |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 105 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 2760 | MPa | ASTM D638 |
| Tensile Strength | 49.6 | MPa | ASTM D638 |
| Flexural Modulus | 2960 | MPa | ASTM D790 |
| Flexural Strength | 89.6 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| -20°C, 3.18 mm | 37 | J/m | |
| 23°C, 3.18 mm | 53 | J/m | |
| Gardner Impact (23°C) | 36.2 | J | ASTM D3029 |
| Drop Impact Resistance (23°C) | 111 | J/cm | ASTM D4226 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed | 71.7 | °C | |
| 1.8 MPa, Unannealed | 70.0 | °C |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | V-0 | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 65.6 | °C | |
| Drying Time | 2.0 to 4.0 | hr | |
| Drying Time, Maximum | 6.0 | hr | |
| Suggested Shot Size | 35 to 75 | % | |
| Suggested Max Regrind | 50 | % | |
| Rear Temperature | 163 | °C | |
| Middle Temperature | 174 to 191 | °C | |
| Front Temperature | 182 to 193 | °C | |
| Nozzle Temperature | 177 to 193 | °C | |
| Processing (Melt) Temp | 199 to 204 | °C | |
| Mold Temperature | 15.6 to 48.9 | °C | |
| Injection Pressure | 82.7 to 138 | MPa | |
| Holding Pressure | 48.3 to 82.7 | MPa | |
| Back Pressure | 0.345 to 1.38 | MPa | |
| Screw Speed | 25 to 80 | rpm | |
| Clamp Tonnage | 3.4 | kN/cm² | |
| Screw L/D Ratio | 16.0:1.0 to 24.0:1.0 | ||
| Screw Compression Ratio | 1.5:1.0 to 2.5:1.0 |
| Note Message | |
|---|---|
| 1 . | Distance/Wall Thickness |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| DIC.PPS Z-650-T6 | DIC Corporation | PPS | DIC.PPS |
| Diamond ASA S-555T | Network Polymers, Inc. | ASA | Diamond ASA |
| Kepamid® 1320GMH | Korea Engineering Plastics Co., Ltd | Nylon 6 | Kepamid® |
| Iupilon® GSH2040KR | Mitsubishi Engineering-Plastics Corp | PC | Iupilon® |
| Sylvin 8773-60D Green 3149 | Sylvin Technologies Incorporated | PVC, Rigid | Sylvin |
