Order Products : sales@su-jiao.com
LTM® 318-1B
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Cytec Industries Inc. |
| Trademark: | LTM® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | YClnms_LTM-318-1B.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
LTM® 318-1B is a matrix system developed for the production of 180°C (356°F) capable tooling using oven vacuum bag processing. LTM318-1B offers a 65°C (149°F) initial cure capability, long out life and, after post-cure, resistance to thermal cycling to 180°C (356°F). LTM318-1B used in conjunction with LTF318B ZPREG® selective impregnation technology surface films offers new possibilities for the manufacture of cost- effective, high quality composite mould tools. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Specific Gravity 1 | 1.25 | g/cm³ |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Glass Transition Temperature | |||
| -- 2 | 80.0 | °C | |
| -- 3 | 210 | °C | |
| CLTE - Flow 4 | 2.9E-6 to 3.4E-6 | cm/cm/°C |
| Note Message | |
|---|---|
| 1 . | Cured resin |
| 2 . | DMA E' onset, 16 hours at 65°C (149°F) |
| 3 . | DMA E' onset, Post-cured at 15 minutes at 200°C (392°F) + 8 hours at 190°C (374°F) |
| 4 . | Carbon |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Melos™ FM 1352 | Melos GmbH | TPO (POE) | Melos™ |
| Adiprene® Duracast® S800 | Chemtura | PUR-Ester/MDI | Adiprene® Duracast® |
| Bergamid™ A700 G25 H (f1) | PolyOne Corporation | Nylon 66 | Bergamid™ |
| Emulprene® 1011 | INSA | SBR, Emulsion | Emulprene® |
| TechnoFiber PP LGF 60-10-01 H | TechnoCompound GmbH | PP, Unspecified | TechnoFiber |
