Order Products : sales@su-jiao.com
PolyBlend™ 1100 75A
| Category: | PUR, Unspecified , Polyurethane |
| Manufacturer: | CardioTech International, Inc. |
| Trademark: | PolyBlend™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | YBMgMq_PolyBlend-1100-75A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
PolyBlend™1100 75A is a polyurethane material,. This product is available in North America and is processed by extrusion or injection molding. PolyBlend™The main features of 1100 75A are:
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Hardness | Nominal Value | Test Method | |
|---|---|---|---|
| Durometer Hardness (Shore A) | 75 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% strain | 2.90 | MPa | ASTM D412 |
| 300% strain | 5.03 | MPa | ASTM D412 |
| Tensile Strength (Yield) | 22.4 | MPa | ASTM D412 |
| Tensile Elongation (Yield) | 580 | % | ASTM D412 |
| Tear Strength 1 | 42.0 | kN/m | ASTM D624 |
| Additional Information |
|---|
| Tensile Modulus, ASTM D412-61T: 400 psi |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 202 | °C | |
| Cylinder Zone 2 Temp. | 207 | °C | |
| Cylinder Zone 3 Temp. | 213 | °C | |
| Melt Temperature | 213 | °C | |
| Die Temperature | 210 | °C |
| Extrusion instructions |
|---|
| Clamp Temperature: 415 °FL/D Screw Ratio: 24:1 |
| Note Message | |
|---|---|
| 1 . | C mould |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Xuchuan XCA-4533 | Xuchuan Chemical (Suzhou) Co., Ltd | PUR, Unspecified | Xuchuan |
| Biorene® HF-20 | Resirene, S.A. de C.V. | PS Alloy | Biorene® |
| Andur 2-60 DP | Anderson Development Company | PUR-Ether/TDI | Andur |
| OLEFISTA™ QM4301D/QMC292 | Mitsubishi Chemical Performance Polymers, Inc. | Elastomer, Specialty | OLEFISTA™ |
| PENTAMID AB S GV50 H black | PENTAC Polymer GmbH | Nylon 66/6 | PENTAMID AB |
