Order Products : sales@su-jiao.com

KUBE PIR 22402

Category:	HDPE , High Density Polyethylene
Manufacturer:	KUBE Electronics AG
Trademark:	KUBE PIR
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	Y6OOSV_KUBE-PIR-22402.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Transmissive Plastic Injection Molding Granulates For fresnel lenses and windows of PIR motion detectors, thermal imaging cameras and non-contact thermometers Features: The best material for fresnel lenses Specially suited for thin parts High transmission in the 7 to 14 µm central passive infrared (PIR) band Choice of colors and MFI RoHS and TSCA conform Excellent visible light absorption available for low false alarm rate / VDS conformity Special colors available on request According to KUBE's experience, these materials exhibit no substantial loss of specification over 10 years 22402: whitish (75% 22300 + 25% 22400a)

Message

Transmissive Plastic Injection Molding Granulates

For fresnel lenses and windows of PIR motion detectors, thermal imaging cameras and non-contact thermometers

Features:

The best material for fresnel lenses

Specially suited for thin parts

High transmission in the 7 to 14 µm central passive infrared (PIR) band

Choice of colors and MFI

RoHS and TSCA conform

Excellent visible light absorption available for low false alarm rate / VDS conformity

Special colors available on request

According to KUBE's experience, these materials exhibit no substantial loss of specification over 10 years

22402: whitish (75% 22300 + 25% 22400a)

General Information
Features	Good UV resistance Flame retardancy
Uses	Thin wall parts Lens
RoHS Compliance	RoHS compliance
Appearance	White Available colors
Forms	Particles

Physical	Nominal Value	Unit	Test Method
Density	0.951 - 0.960	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	17	g/10 min	ISO 1133

Injection	Nominal Value	Unit
Drying Temperature	< 70.0	°C
Drying Time	2.0	hr
Hopper Temperature	50.0 - 70.0	°C
Rear Temperature	170 - 220	°C
Middle Temperature	200 - 220	°C
Front Temperature	210 - 220	°C
Nozzle Temperature	220 - 230	°C
Processing (Melt) Temp	130	°C

Resin Grade	Manufacturer	Category	Trademark
Sanren M3700C (On-spec.)	SINOPEC Shanghai Petrochemical Co. Ltd.	PP Homopolymer	Sanren
Scolefin 53 G 10-0	Ravago Group	PP Homopolymer	Scolefin
Shuang-Bang AB-120	Shuang-Bang Industrial Corp.	PUR, Unspecified	Shuang-Bang
ALTECH® PP-H A 2030/250 GF30 CP	ALBIS PLASTIC GmbH	PP Homopolymer	ALTECH® PP-H
Dynaflex™ G7702-9001-02	PolyOne Corporation	TPE	Dynaflex™