Order Products : sales@su-jiao.com
POLYCOMPO PE 3530
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | POLYCOMPO Co.,Ltd. |
| Trademark: | POLYCOMPO PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Y6Gooa_POLYCOMPO-PE-3530.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| POLYCOMPO PE 3530 is a Low Density Polyethylene product. It can be processed by extrusion and is available in Asia Pacific. Primary characteristic: good aesthetics. |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.924 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) | 2.3 | g/10 min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Break, Injection Molded) | 19.0 | MPa | ISO 527-2 |
| Tensile Strain (Break, Injection Molded) | 400 | % | ISO 527-2 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -76.0 | °C | ASTM D746A, ISO 974 |
| Vicat Softening Temperature | 98.0 | °C | ASTM D1525, ISO 306 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Adiprene® BL 16 | Chemtura | PUR-Ether/TDI | Adiprene® |
| Arak HDPE EX4 | Shazand (Arak) Petrochemical Corporation | HDPE | Arak HDPE |
| LUVOCOM® 1-3260/NC | Lehmann & Voss & Co. | Nylon 66 | LUVOCOM® |
| Dow Corning® MG-2402 | Dow Corning Corporation | Silicone | Dow Corning® |
| Sylvin 3299-90 Natural | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
